Nomad's post about his tool kit got me thinking about what I would need to jerry rig a repair on a car or other piece of equipment while on the far side of nowhere. Keeping in mind the "small and light" constraints needed for travel, here goes:

1) 4 inch, needle nose, vice grips - Irwin 4LN -2.1 oz
2) 4 inch crescent wrench - Stanley Proto J704S - 2.1 oz
3) MT/SAK/other with scissors and file, and bit kit - Victorinx workchamp - 7 oz + LM bit kit - 4 oz.
4) 50 ft mechanics wire (19 ga stainless) - 1.6 oz
5) High temperature epoxy - JB weld 8297 - 2.1 oz
6) 10 ft Silicone "fusing" tape - Duck Brand 442055 - 1.6 oz
7) 1.5 and 2 inch hose clamps - 2.8 oz
8) Duct tape flat pack (5 yards) - generic - 2 oz
9) waxed nylon or polyester thread (30-50 lb test) and upholstery needles - 2 oz

Total weight = 27 oz (1.7 lbs)
_________________________
Hope for the best and prepare for the worst.

The object in life is not to be on the side of the majority, but to escape finding oneself in the ranks of the insane