Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Page 2 of 3 < 1 2 3 >
Topic Options
#34743 - 11/29/04 05:09 PM Re: 3rd World water purification
paramedicpete Offline
Pooh-Bah

Registered: 04/09/02
Posts: 1920
Loc: Frederick, Maryland
This method works well in those latitudes for which it was developed. I have tried and tested the method it works as described. Pete

http://www.sodis.ch/

Top
#34744 - 11/29/04 05:21 PM Re: 3rd World water purification
paramedicpete Offline
Pooh-Bah

Registered: 04/09/02
Posts: 1920
Loc: Frederick, Maryland
They are/were called or produced by a company called Dydacks (spelling may be way off). We used to use them in our lab, but I believe they are no longer produced. I will take a look to see if there are any left. We have move to a product called an integrator strip. Which looks at temp. (you can get them for various temps.) and time. I do not think for this application they would be a viable option.

On a second note: one reason the solar method of disinfection works well, is not just the increase in temp, but the intensity of UV radiation at the middle latitudes.

Pete

Top
#34745 - 11/29/04 05:44 PM Re: 3rd World water purification
bountyhunter Offline


Registered: 11/14/03
Posts: 1224
Loc: Milwaukee, WI USA
Goatrider:

There is a reusable wax based temperature sensor that you can place in the bottle which resolidifys when removed from the heat. It becomes liquid within its own container at 160 degrees F.

Bountyhunter

Top
#34746 - 11/29/04 05:47 PM Re: 3rd World water purification
GoatRider Offline
Old Hand

Registered: 08/28/04
Posts: 835
Loc: Maple Grove, MN
bountyhunter,

Yah, that's what I'm thinking of. I won't bother to ask you where to get it, because there's hardly any chance I'll be able to use it in Minnesota.
_________________________
- Benton

Top
#34747 - 11/29/04 05:48 PM Re: 3rd World water purification
bountyhunter Offline


Registered: 11/14/03
Posts: 1224
Loc: Milwaukee, WI USA
Brian:

For more heat, you make a collapsible cardboard solar oven painted flat heat resistant black in its chamber with reflective foil faced cardboard sides angled to direct more sunlight into the chamber where the bottle sits.

Bountyhunter

Top
#34748 - 11/29/04 06:00 PM Re: 3rd World water purification
Alejandro Offline
Stranger

Registered: 07/06/04
Posts: 23
Loc: Caracas - Venezuela
Hi folks,
This is my small contribution to the forum.
I live in Venezuela a so called "3rd world country" and have several hours of traveling, camping and hiking but this is the first time that I heard about this method. What we use to do is the old time classic of boiling the water fro 10 min. and eve some times adding a drop of chlorine solution, same used to whiten clothes, per each litter of water.
Even thought I have to recognize that killing bacteria through UV radiation makes sense, I used all the time to kill odors in the cloth wile I'm in the wilderness.
Hope this helps

Top
#34749 - 11/29/04 06:58 PM Re: 3rd World water purification
Anonymous
Unregistered


UV rays do come in handy. Reading a survival book by Barry Davies I came accross a paragraph stating that if you cannot wash your clothes hang em out in the sun. Kills all the bacteria in them.The trick came in handy while I sailing for 2 weeks, bathing all my rags on the deck during an afternooon sun.

Top
#34750 - 11/29/04 07:15 PM Re: 3rd World water purification
Chris Kavanaugh Offline
Carpal Tunnel

Registered: 02/09/01
Posts: 3824
There is always another method to do something. I think this method can be listed with firemaking with an ice lens. It works, but why bother if you walked out the door with duct tape holding your grey cells in place? The perjorative term "3rd World" is equally unrealistic. I can go to some of our indian reservations, appalachia, and freeway underpasses in Los Angeles where Americans live in abject despair. I only live in one world, and it doesn't come with numbers. <img src="/images/graemlins/mad.gif" alt="" />

Top
#34751 - 11/29/04 10:49 PM Re: 3rd World water purification
Anonymous
Unregistered


I have in the past made double chambered solar stills with three clear plastic bottles - 2 2 litre, 1 1 litre/20oz, duct tape and rope. It is based on the bottle compost design.

The tricky part is cutting the 2 litres to be able to put the 1 litre in and taping it up again. You cut the top off of both of the big bottles(about where you see the curve in starting for the top cone) and throw one of them away. Excuse me, recycle it! <img src="/images/graemlins/smile.gif" alt="" /> Turn the remaining top over so that the cone is pointed down into the bottle. Make sure it will fit without falling in. take it back out again. Measure the bottom of the smaller bottle and cut the very top off of the cone about 1/4 inch smaller than the small bottle. Cut 'tabs' and force the small bottle into it with the cone facing down. To make it easier for condensation to get to the bottom bottle, you may want to make holes in the cone, too or cut one or two of the tabs completely off.

Put the 1 liter in the cone(careful!) and put the other bottle bottom over top ofit. Tape up.

Oh, I guess I should mention one minor thing to do before taping it up - You place water in the small bottle. 1/2 full is good, more and it can tip over and spill. Things that can make it better include twigs or cooking skewers inside to keep things propped up, black paper or paint for the top bottle and a good brick wall or big rock for thermal mass.

The rope is to hang the bottle contraption in a tree or from the eves of a house.

I was able to capture about 4 oz of 'distilled' water in a 36 hour period from about 8 oz of crappy water put into the small bottle. Not a great method, and not a great producer, but good to put in a camp when you know you are going to come back in a few days.

Just a thought brought on by the mentioned solar reflector... (my thighs in summer...)

Rena

Top
#34752 - 11/30/04 12:53 AM Re: 3rd World water purification
GoatRider Offline
Old Hand

Registered: 08/28/04
Posts: 835
Loc: Maple Grove, MN
Gene,

I think I need a picture.
_________________________
- Benton

Top
Page 2 of 3 < 1 2 3 >



Moderator:  Alan_Romania, Blast, cliff, Hikin_Jim 
April
Su M Tu W Th F Sa
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30
Who's Online
0 registered (), 611 Guests and 101 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
Explorer9, GallenR, Jeebo, NicholasMarshall, Yadav
5368 Registered Users
Newest Posts
Corny Jokes
by wildman800
04/24/24 10:40 AM
People Are Not Paying Attention
by Jeanette_Isabelle
04/19/24 07:49 PM
USCG rescue fishermen frm deserted island
by brandtb
04/17/24 11:35 PM
Silver
by brandtb
04/16/24 10:32 PM
EDC Reduction
by Jeanette_Isabelle
04/16/24 03:13 PM
New York Earthquake
by chaosmagnet
04/09/24 12:27 PM
Bad review of a great backpack..
by Herman30
04/08/24 08:16 AM
Our adorable little earthquake
by Phaedrus
04/06/24 02:42 AM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit
Glossary
Test

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.