Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Topic Options
#292666 - 07/04/19 02:48 PM Gerber Exchange-A-Blade Saw: Unfortunate Fail
Jeanette_Isabelle Online   content
Pooh-Bah

Registered: 11/13/06
Posts: 2023
Loc: Somewhere in Florida
Doug includes a Gerber Exchange-A-Blade Saw in his Aviation Survival Pack. Since everything in Doug's Aviation Survival Pack is supposed to be top quality, I expected no less from the Gerber.

This morning I watched this "Unfortunate Fail."

https://www.youtube.com/watch?v=1DnmyqMVAYQ

Perhaps Doug should replace the Gerber with something else.

Jeanette Isabelle
_________________________
"Whatever is rightly done, however humble, is noble." -- Frederick Henry Royce

Top
#292667 - 07/04/19 03:11 PM Re: Gerber Exchange-A-Blade Saw: Unfortunate Fail [Re: Jeanette_Isabelle]
dougwalkabout Offline
Crazy Canuck
Carpal Tunnel

Registered: 02/03/07
Posts: 2747
Loc: Alberta, Canada
I find Gerber's quality control quite hit-or-miss. For the saws, the blades are always a little too thin for my taste. (The Coghlans sierra saws are actually better IMO.)

The supposed "fail" here looks more like operator error though.

This is a pull-stroke saw. Very thin blade with very sharp teeth, especially new. When using them, you use very little force on the pull stroke and let the teeth do the work, and use zero force on the return stroke.

I have to train users on the correct technique -- otherwise the blade ends up bent up like a pretzel. Guys who are impatient and accustomed to regular hand saws (push stroke) often break them.

Note that the saw was still functional after it was damaged. And, they had a spare blade in the sheath.


Edited by dougwalkabout (07/04/19 03:12 PM)

Top
#292668 - 07/04/19 03:17 PM Re: Gerber Exchange-A-Blade Saw: Unfortunate Fail [Re: Jeanette_Isabelle]
Russ Online   content
Geezer

Registered: 06/02/06
Posts: 5099
Loc: SOCAL
Ive used those saws a lot and I like them. Something to consider in that video though is that the saws teeth are designed to cut on the pull stroke and from what I saw he had pressure on both pull and push. If used properly, the blade is in tension when cutting. Force a thin kerf blade into a bind and then keep pushing and yeah, it can break.

Since the failure was not recorded, my gut feeling is that there was a bit of operator error involved. Whatever...

FWIW

Edit: dougwalkabout great minds think alike wink

PS: Folding pruning saws available at HD



Edited by Russ (07/04/19 03:25 PM)

Top
#292669 - 07/04/19 03:44 PM Re: Gerber Exchange-A-Blade Saw: Unfortunate Fail [Re: Jeanette_Isabelle]
hikermor Offline
Geezer in Chief
Geezer

Registered: 08/26/06
Posts: 6854
Loc: southern Cal
I agree, op error is a distinct possibility. However, the Gerber folding saw is not of the best quality. I have owned two and one has been rendered inoperable, though not in the manner depicted.

IME, a much better product is a Silky saw, either the Pocket Boy or the F180. I have been using both of these around the house and they are great at pruning, etc. One of these would go into the field with me, if I plan on doing some cutting.

With any folding saw, it is a good idea to have a replacement blade, because all of them will dull with use over time. I don't believe the blade can be easily sharpened.

The Gerber was about the best available for the price at the time the kit was developed. It is up to the owner to improve the components as they see fit. Give me $10,000 and I am sure I can improve the items in this or any other kit.


Edited by hikermor (07/04/19 04:14 PM)
_________________________
Geezer in Chief

Top
#292670 - 07/04/19 04:04 PM Re: Gerber Exchange-A-Blade Saw: Unfortunate Fail [Re: hikermor]
Jeanette_Isabelle Online   content
Pooh-Bah

Registered: 11/13/06
Posts: 2023
Loc: Somewhere in Florida
Originally Posted By: hikermor
IME, a much better product is a Silky saw, either the Pocket Boy or the F180. I have been using both of these around the house and they are great at pruning, etc. One of these would go into the field with me, if I plan on doing some cutting.

The Silky and the Sven Saw are the two saws that, from what I'm hearing, are the most recommended, positively revied saws. Granted, I don't do a lot of sawing. I am far from an expert.

http://www.svensaw.com/

The two saws go with very different approaches. Silky, like other modern saws, unfold and go. Sven, being old school, it takes a few seconds to set up and a few seconds to fold it up again.

Also, the wingnut on the Sven saw has been known to drop and get lost. That is easy to fix by going to your nearest big box store.

Disclaimer: I have no affiliation with any company that makes saws.

Jeanette Isabelle
_________________________
"Whatever is rightly done, however humble, is noble." -- Frederick Henry Royce

Top
#292672 - 07/04/19 04:18 PM Re: Gerber Exchange-A-Blade Saw: Unfortunate Fail [Re: Jeanette_Isabelle]
hikermor Offline
Geezer in Chief
Geezer

Registered: 08/26/06
Posts: 6854
Loc: southern Cal
So, you are out sawing in the woods (or swamps, as the case may be) and you can stop activity and go to the nearest store (big box or otherwise?). Not at all feasible, in all too many scenarios, and way inconvenient, at best.
_________________________
Geezer in Chief

Top
#292674 - 07/04/19 04:27 PM Re: Gerber Exchange-A-Blade Saw: Unfortunate Fail [Re: hikermor]
Jeanette_Isabelle Online   content
Pooh-Bah

Registered: 11/13/06
Posts: 2023
Loc: Somewhere in Florida
The easy answer is to be mindful of your wingnut. If that is not practical, keep a few wingnuts in your vehicle.

Jeanette Isabelle
_________________________
"Whatever is rightly done, however humble, is noble." -- Frederick Henry Royce

Top
#292678 - 07/04/19 06:08 PM Re: Gerber Exchange-A-Blade Saw: Unfortunate Fail [Re: Jeanette_Isabelle]
Montanero Offline
Veteran

Registered: 10/14/08
Posts: 1482
Loc: North Carolina
I have the Silky and the Sven, and both have performed very well under difficult conditions for an extended period.

Top



Moderator:  Alan_Romania, Blast, cliff, Hikin_Jim 
July
Su M Tu W Th F Sa
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31
Who's Online
0 registered (), 210 Guests and 3 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
NickChurick, Willie, Pierdolec89, willpo, Mollerstrom
5287 Registered Users
Newest Posts
The Summer I Was Lost, 1965
by WesleyH
01:27 AM
John D. Mccann's Book, "Build The Perfect Survival
by WesleyH
01:22 AM
Remains of actor found in remote area
by WesleyH
11:51 PM
OVERBOARD VEST
by hikermor
11:31 PM
Summer car prep
by Russ
11:25 PM
fanny pack sized kit
by teacher
08:40 PM
A very humbling 'survival' experience!
by Phaedrus
07/14/19 09:05 PM
New Orleans flooding / T.S. Barry
by wildman800
07/13/19 04:43 PM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit
Glossary
Test

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.