I've always been wondering if you could make your own wire saw despite BCB and others producing wire saw of reasonable quality at a (sometimes) fair price. But for those of you who rather DIY,or for those who can't find any wire saws in the shops in where you live, here's what I did.<br><br> I was looking for aircraft cable to make my own snares with, seeing how the WSI kit has simple snares with fishing swivels at the ends of crimped aircraft cable. I thoght I could do that too. BUT I couldn't find any aircraft cable in the hardware stores here (OK so maybe I did't try hard enough, but no matter) so I wandered to the fishing tackle shops. Lo and behold - big game fishing trolling and leader wire. 49 strand uncoated stainless steel wire #44 test rated at 50lb (I'm not a fisherman, so it's all greek to me). I thought this would make really cool snare wire, and then I looked at it a little more carefully and considered that this could make a wire saw as well ( they cut on the principle of friction).<br><br>So with the big game wire, 2 number 6 fishing swivels, 2 copper sleeves (which came with the wire) and 2 split rings, I made the wire saw by threading the wire through the swivels and looping the wire back on itself into the sleeve and crimped it, much like the WSI kit game snare here:<br>http://www.equipped.org/pp/pic899.htm<br><br>I tested the wire saw and it works OK for a home made in 5 min project. It was able to cut through some PVC pipe and a small tree limb, though it's not as good as the embryotomy wire used in the BCB wire saw, but is more flexible and compact and lighter. Plus you can now make your own snares from the fishing wire.<br>Food for thought and fun for a rainy day.<br><br><br>