Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Page 1 of 2 1 2 >
Topic Options
#81734 - 01/01/07 09:10 PM Greetings,
DLR Offline
Newbie

Registered: 01/01/07
Posts: 30
Loc: Phoeniz, AZ
Hi all,
Thought I'd drop a quick note to say "Hi" and a quick introduction.

I'm currently a gunsmith living in Phoenix, AZ. I've always been involved with outdoor activities (Boy Scouts, etc.) and enjoy the outdoors.

I've lurked in the forums for a little bit and decided to join. I'm impressed but the level of intellect and good information.

I hope I can offer some type of positive addition and interaction to the boards.

Cheers,

DLR

Top
#81735 - 01/01/07 09:26 PM Re: Greetings,
Comanche7 Offline
Addict

Registered: 07/04/02
Posts: 436
Loc: Florida
Hi DLR,

Welcome aboard! Please look around and come back ofter to enjoy all that ETS has to offer. We look forward to hearing our thoughts.

Happy New Year,
Comanche7


Top
#81736 - 01/01/07 09:27 PM Re: Greetings,
oldsoldier Offline
Old Hand

Registered: 11/25/06
Posts: 742
Loc: MA
Welcome! I too am new, figured I'd be the first to say hello.
My experience here thus far has been uplifting. The maturity of the folks, their wisdom, and their willingness to help everone else out is refreshing, to say the least.
Edit: apparently, I was the second! Ah well...


Edited by oldsoldier (01/01/07 10:59 PM)
_________________________
my adventures

Top
#81737 - 01/01/07 10:00 PM Re: Greetings,
Eugene Offline
Carpal Tunnel

Registered: 12/26/02
Posts: 2997
Hmm, gunsmith. I have an old black powder rifle that was my grandfathers grandfathers. It was made by Great Western Gun works which my searching says went out of business in the early 1900's. I need a hammer for it and the shaft the hammer pivots on. I have the shaft but the screw that holds the hammer on is stripped out and he didn't have the right hammer for it as its off by 45 degrees. I would like to restore it to shooting condition, its pretty rough so I don't think I could get it back to a collection worthy state but would like to shoot it a few times then put it away and pass it down to my grandkids someday. Do you have any resources for parts and how to restore books?

Top
#81738 - 01/01/07 11:15 PM Re: Greetings,
DLR Offline
Newbie

Registered: 01/01/07
Posts: 30
Loc: Phoeniz, AZ
Fireamrs of that era are a pretty touchy project. There are pro's and con's to each route. The big decision is really a matter of what you want to do with it. If you think it's valuable and want to retain that value, do nothing, except a light coat of oil to preserve all the metal. Do not strip or repair anything. No steel wool, nothing, just preserve what it is. The bore might need a bit more attention because, as I'm sure you know, black power is corrosive and needs to be neutralized, or it may continue to rust the bore. This however, is best left up to someone with the skills and specializes in something like this (read: not me). I don't have enough experience with antique firearms to be of help, other than to say what I have above.

The other route, like you mentioned, is to restore it to an original state. Again, best left up to someone who specializes in this type of work. You WILL spend gobs of cash going this route, and even then, may not be worth any more, possibly even less, than if you had left it alone in the first palce.

Long story even longer, I have no good answer. It's hard to judge these things, sight unseen, and not knowing what you really want in the end.

If you want to just get it back into mechanical working order, try a company called Tracks of the Wolf. Not sure if ther are on the internet or not, but shouldn't be hard to find. They deal in this kind of thing, parts, re-enactors, etc. But, I have a sinking feeling that with what you have, you may have to have a good 'smith make the parts you need anyway.

However you look at it, I would recommend NOT attempting to fire it, regardless. Something that old can be a real danger. There isn't a good way to see if there is enough wall thickness to be safe. Even if you get away with firing it a few times, you never know when she'll let go. Upwards of 30 to 50,000psi blowing up 3 inches in front of my nose isn't what I call a good time.

Hope this helps. Feel free to ask any questions you have.

DLR <img src="/images/graemlins/smile.gif" alt="" />

Top
#81739 - 01/02/07 03:53 AM Re: Greetings,
Alan_Romania Offline

Addict

Registered: 06/29/05
Posts: 648
Loc: Arizona
Hey, Welcome DLR! You will find the board friendlier then that other one <img src="/images/graemlins/wink.gif" alt="" />
_________________________
"Trust in God --and press-check. You cannot ignore danger and call it faith." -Duke

Top
#81740 - 01/02/07 05:42 AM Re: Greetings,
north_of_north Offline
Stranger

Registered: 11/29/05
Posts: 22
Loc: Gunflint Trail, Minnesota, USA
I see that you already have. Welcome.

Top
#81741 - 01/02/07 08:01 AM Re: Greetings,
Nicodemus Offline
Paranoid?
Veteran

Registered: 10/30/05
Posts: 1341
Loc: Virginia, US
Welcome aboard DLR!
_________________________
"Learn survival skills when your life doesn't depend on it."

Top
#81743 - 01/04/07 04:28 PM Re: Greetings,
benjammin Offline
Rapscallion
Carpal Tunnel

Registered: 02/06/04
Posts: 4020
Loc: Anchorage AK
Welcome aboard mate,

Do you have a primary focus in firearms, or just in general?

Me being hunter ed, I tend towards that arena mostly. What do you reckon's gonna happen now that Pelosi is gonna run the House or Representatives?
_________________________
The ultimate result of shielding men from the effects of folly is to fill the world with fools.
-- Herbert Spencer, English Philosopher (1820-1903)

Top
#81745 - 01/04/07 09:59 PM Re: Greetings,
Hghvlocity Offline
Enthusiast

Registered: 01/12/05
Posts: 248
Loc: Oklahoma
I was a gun dealer in my past and I second everythind DLR says..and would add Dixie Gun Works also has parts for Front stuffers and might be able to help out. A catalog costs you $, but they apply the cost to your first order so you do get it back. <img src="/images/graemlins/wink.gif" alt="" />

Welcome DLR
_________________________
Get busy living...or get busy dying!

Top
Page 1 of 2 1 2 >



Moderator:  Alan_Romania, Blast, chaosmagnet, cliff 
November
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
Who's Online
0 registered (), 805 Guests and 0 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
Aaron_Guinn, israfaceVity, Explorer9, GallenR, Jeebo
5370 Registered Users
Newest Posts
Missing Hiker Found After 50 Days
by Ren
Yesterday at 02:25 PM
Leather Work Gloves
by KenK
11/24/24 06:43 PM
Satellite texting via iPhone, 911 via Pixel
by Ren
11/05/24 03:30 PM
Emergency Toilets for Obese People
by adam2
11/04/24 06:59 PM
For your Halloween enjoyment
by brandtb
10/31/24 01:29 PM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit
Glossary
Test

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.