Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Page 1 of 3 1 2 3 >
Topic Options
#61519 - 03/07/06 08:48 PM Fixed blade EDC knife
badgerw Offline


Registered: 03/07/06
Posts: 14
Loc: South Texas
I'm looking for advice on a fixed-blade knife for Every Day Carry. Here are a few limits:

1. Must be a fixed blade. Local law prohibits locked-blade knives. Go figure...

2. Must be less than 5.5 inches. State law.

3. Can't be a bowie-pattern or double-edged (not that I'd carry a double-edged blade anyway). State law, again.

I'm leaning towards a 3-4 inch blade, probably fairly wide. I've settled into the "sharpened pry bar" school of carry knives.

I'd like the cost to stay under $100.

I typically wear slacks and a polo shirt in my office. Since I'm going back to carrying a concealed handgun, I'm probably going to start wearing a sport coat again. So whatever I get, I'd like it to have a low profile.

Thanks in advance,
Bill

Top
#61520 - 03/07/06 09:53 PM Re: Fixed blade EDC knife
xbanker Offline
Addict

Registered: 04/21/05
Posts: 484
Loc: Anthem, AZ USA
Bill-

The Becker Necker fits your blade criteria (3.25" blade length) and, I think, your "sharpened prybar" requirement. And the price is certainly right at ~$30. Decent Kydex sheath. With mine, like many folks, I've wrapped the handle in paracord; makes little more comfortable, and a convenient way to carry paracord.

For a great selection of more traditional fixed-blade knives, with many blade lengths 4.25" and shorter (you won't find any "Rambo knives" here), take a look at Bark River Knives.

You won't find much in the way of "sharpened prybars" like something in the Becker line, but they are tough, well-made knives. Many blade and handle-material configurations. I also like fact the blades are convex ground. You'll find prices below MSRP at various online knife retailers (some below $100, some slightly above, depending on knife, and which handle-material option). Folks on the knife forums speak highly of them; waiting for the order of my first two to be delivered as we speak.

And I've read good things about the Ontario RAT series for the <$100 range. In your blade range, the RAT 3 (3.3" blade, ~$80) and the TAK-1 (4.25" blade) and <$80. Don't own either.

Dan
_________________________
"Things that have never happened before happen all the time." — Scott Sagan, The Limits of Safety

Top
#61521 - 03/08/06 03:27 AM Re: Fixed blade EDC knife
badgerw Offline


Registered: 03/07/06
Posts: 14
Loc: South Texas
Dan -

I like the Becker Necker. The paracord wrapped handle looks good, too.

Thanks for the input.

V/R

Bill

Top
#61522 - 03/08/06 01:48 PM Re: Fixed blade EDC knife
Dave568 Offline
newbie

Registered: 09/24/05
Posts: 46
Loc: Massachusetts
While I don't own the Becker Necker yet, I do own a Becker BK-7, and it is an amazingly high quality knife for the price. It takes and keeps a very sharp edge, and it is amazingly durable. I highly recommend the Becker line.

Top
#61523 - 03/08/06 08:53 PM Re: Fixed blade EDC knife
David Offline
Enthusiast

Registered: 10/09/02
Posts: 245
Loc: Tennessee (middle)
Bill--

The Becker Necker (BK11) & the Bark Rivers are excellent suggestions, so I don't think you'd go wrong with either.

However, I'm also partial to Entrek knives ( web page) from Ray Ennis. I have his Javalina (yes, I know it's misspelled...), which might well fit your requirements. The JAG & Badger may well, also.

Entrek knives are well-designed & well-made (from 440C stainless, properly heat-treated, with canvas Micarta scales), and can indeed fall into the sharpened prybar category.

You might wish to replace the sheath, but you could adapt the factory Kydex to IWB (inside waistband) carry by trimming off the fixed belt loop and adding a small loop of leather or nylon webbing & a Chicago screw.

Whatever you choose, have fun with the selection process. Please let us know what you decide, & how you like it.

Regards,

David

Top
#61524 - 03/08/06 09:04 PM Re: Fixed blade EDC knife
KenK Offline
"Be Prepared"
Pooh-Bah

Registered: 06/26/04
Posts: 2210
Loc: NE Wisconsin
It is important that a Becker Necker buyer holds it in their hand first. The handle is definitely not the most comfortable thing around. Great blade size and shape, but the handle is tough to deal with. If someone sold a screw-on handle that extended the length of the grip a bit and gave it thickness, I'd surely buy it.

Top
#61525 - 03/08/06 09:14 PM Re: Fixed blade EDC knife
MissouriExile Offline
dedicated member

Registered: 11/22/05
Posts: 125
Loc: SW Missouri / SE Wisconsin
Out of curiosity, which state laws are you referring to?

Jon

Top
#61526 - 03/08/06 09:50 PM Re: Fixed blade EDC knife
xbanker Offline
Addict

Registered: 04/21/05
Posts: 484
Loc: Anthem, AZ USA
Ken -
Quote:
It is important that a Becker Necker buyer holds it in their hand first. The handle is definitely not the most comfortable thing around.

You're absolutely right about that. And I should've elaborated when I mentioned wrapping handle w/paracord to make a little more comfortable.

Although paracord does add handle bulk, does nothing to lengthen grip surface. I've got average-size hands, and end up with a 3-1/2 finger grip (is there such a thing?), or else pinkie resting against the butt-end.

Like you say, great knife (especially for the price), but the handle/grip is a turn-off to some.

Dan
_________________________
"Things that have never happened before happen all the time." — Scott Sagan, The Limits of Safety

Top
#61527 - 03/08/06 10:51 PM Re: Fixed blade EDC knife
badgerw Offline


Registered: 03/07/06
Posts: 14
Loc: South Texas
Texas criminal law defines an "illegal knife" as one with a blade in excess of 5.5 inches, or having a bowie-pattern blade, or being a dirk; dagger; or poniard.

City ordinance here in San Antonio oulaws the carry of locking blade knives.

Enforcement is a police officer's discretion. Even though I have a Concealed Handgun License, I can't carry an "illegal knife."

A few years back I was stopped on the street by a local cop. He asked for ID and I showed him my driver's license. He saw my Spyderco Endura in my pocket and asked me to hand it over, which I did. He ran my license and saw that I had a CHL, which he asked to see. I showed it and told him I wasn't carrying. After he finished the interview, he returned my Spyderco with a warning about the city ordinance.

Since then, I've refrained from carrying my Spyderco. So I'm looking for a good fixed blade EDC knife.

Bill

Top
#61528 - 03/08/06 11:00 PM Re: Fixed blade EDC knife
badgerw Offline


Registered: 03/07/06
Posts: 14
Loc: South Texas
Ken -

Thanks for the insight. I have pretty small hands, but the paracord wrap is a given.

Bill

Top
Page 1 of 3 1 2 3 >



Moderator:  Alan_Romania, Blast, cliff, Hikin_Jim 
November
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
Who's Online
0 registered (), 435 Guests and 9 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
Aaron_Guinn, israfaceVity, Explorer9, GallenR, Jeebo
5370 Registered Users
Newest Posts
Leather Work Gloves
by dougwalkabout
Today at 02:35 AM
Satellite texting via iPhone, 911 via Pixel
by Ren
11/05/24 03:30 PM
Emergency Toilets for Obese People
by adam2
11/04/24 06:59 PM
For your Halloween enjoyment
by brandtb
10/31/24 01:29 PM
Chronic Wasting Disease, How are people dealing?
by clearwater
10/30/24 05:41 PM
Things I Have Learned About Generators
by roberttheiii
10/29/24 07:32 PM
Gift ideas for a fire station?
by brandtb
10/27/24 12:35 AM
The price of gold
by dougwalkabout
10/20/24 11:51 PM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit
Glossary
Test

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.