I am trying to find a way to store a few move vasoline cotton balls in my Altoids kit. I currently have a few inside two plastic straws set lengthwise in the tin, but I have a "hole" of available space left I could cram a few more in. Dimensions slightly larger than 1" x 0.5" Any ideas for a good "holder"? The oft-recommended 35mm film cannister is way too big for an Altoids tin obviously.
I've been toying with those plastic coin tubes you can get at hobby stores. More than 1" long, but they can be cut down and the screw-on cap functions OK if you just press it on (after you've sawed off the threaded part of the tube). They probably wouldn't withstand long term submersion, but an occassional dunking would most likely end up with dry contents, especially if the cap was wrapped with electrical tape. These seem to work OK for the dime-size tubes, but they bulge the tin's lid a little when closing - however they still fit it you hold things together with ranger bands.
I've also found a cylindrical metal lid off an old perfume bottle (not mine, the wife's!) fits this space perfectly - except it has an open end. Duct tape to the rescue, I suppose.
Does anyone have any alternate "little tube" or "little box" suggestions for a 1" x 0.5" space?
Edited by haertig (03/17/05 01:24 AM)