Registered: 11/14/03
Posts: 1224
Loc: Milwaukee, WI USA
Virginian:
You should still have someone put a headspace gauge in the chamber to see if it is within tolerances. If the firing pin protrudes sufficiently dry firing, it could still be the firing pin spring reducing the inertia because the spring is too stiff.
WARNING & DISCLAIMER:
SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted
on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please
review the full WARNING & DISCLAIMER about information on this
site.