Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Page 1 of 2 1 2 >
Topic Options
#295505 - 03/30/20 08:59 PM MacGyvering the coronavirus
brandtb Offline
Addict

Registered: 11/26/04
Posts: 514
Loc: S.E. Pennsylvania
The following is basically a copy of a post I made on another forum -

It may well come to this - home brew ventilators -

https://www.inquirer.com/health/coro...omo=newsletter

I am mechanically inclined enough to do minor wood and metal projects around the house. I am of the opinion that the virus is going to overwhelm the health care system in a very short amount of time. There will be many more people needing ventilators than there is a supply. That being the case, 'You're on your own" takes on a whole new meaning.

From the above link, a mechanical ventilator needs to supply about 400 milliliters — a little more than a soda can’s worth - of air. More may damage the lungs.

See -

https://www.youtube.com/watch?v=4J0d59dd-qM

paying particular attention to the doctor's comments on getting 'tired out.' This is at about 22 minutes in, and describes the muscular effort required to breath. It's like curling a barbell a thousand times - the abdominal muscles just can't do it.

Is there a way to home produce something that would force air into the lungs mechanically? The hard parts, as I see it are -

- One-way valves to direct air into a pump, then close

- some kind of a bladder to collect air and pump it with the assistance of a lever

Any ideas? We may be needing them.


Edited by brandtb (03/30/20 10:14 PM)
_________________________
Univ of Saigon 68

Top
#295507 - 03/30/20 10:15 PM Re: homemade ventilator [Re: brandtb]
EMPnotImplyNuclear Offline
Enthusiast

Registered: 09/10/08
Posts: 382
Thats what this whole quarantine thing seems to be about, making sure enough medicos are there to monitor ventilators ...

Ventilator#Open-source_ventilator

Open-source_ventilator

8127281/Engineers-develop-share-open-source-designs-DIY-ventilators
...
Julian Botta, a third year resident in emergency medicine at Johns Hopkins, created a Google Doc listing some of the basic specifications for a ventilator and how a do-it-yourself version might be assembled.
The idea came to him after he saw several similar projects spread across Github but was concerned that many of the designs were closer to CPAP (continuous positive airway pressure) machines than ventilators, according to a report in Vice.
...
Ventilators are complicated devices that require skillful technicians to use properly, and they're also subject to FDA approvals which mean most home projects are likely to unusable for most hospitals.

...
Gui Cavalcanti, an engineer based in San Francisco, decided to refocus his own DIY ventilator Facebook group called 'Open Source Ventilator Project' after consulting with medical professionals.
'The said, Listen, ventilators are not the issue,' he said. 'The issue is literally everything else.'
He decided to rename the project 'Open Source COVID 10 Medical Supplies' and instead focus on other resources like masks and gloves.
...


whats-plan-c-for-covid-19

Open Source Ventilators
Many groups have sprung up online, using Facebook and/or Slack, including:
Open Source COVID-19 Medical Supplies Facebook Group
Open Source Ventilators (OSV) Ireland
Helpful Engineering Web site
Project Open Air Web Site
TOM Global
1 Million Ventilators

https://www.facebook.com/groups/opensourcecovid19medicalsupplies/
http://opensourceventilator.ie/
http://www.helpfulengineering.org/
https://www.projectopenair.org/
https://tomglobal.org/community?id=5e73198894711e10b13ebe3b
https://helpwithcovid.com/projects/13



Edited by EMPnotImplyNuclear (03/30/20 10:16 PM)

Top
#295510 - 03/31/20 12:02 AM Re: homemade ventilator [Re: brandtb]
Ren Offline
Addict

Registered: 11/05/07
Posts: 543
Loc: Wales, UK

Here's our (UK) requirements for an emergency ventilator

https://assets.publishing.service.gov.uk...MVS001_v3.1.pdf

Top
#295513 - 03/31/20 02:54 AM Re: MacGyvering the coronavirus [Re: brandtb]
UTAlumnus Offline
Old Hand

Registered: 03/08/03
Posts: 1019
Loc: East Tennessee near Bristol
For a one-way valve, look at a fireplace bellows. A small electric motor attached to one handle with a belt driven cam to set the RPM's and a filter and you have the basics of a ventilator.

Top
#295514 - 03/31/20 03:53 AM Re: MacGyvering the coronavirus [Re: brandtb]
LesSnyder Offline
Pooh-Bah

Registered: 07/11/10
Posts: 1680
Loc: New Port Richey, Fla
professionals, would something like this work?

flow chart in order of components

air source... small home air compressor

breathing control... normally closed air solenoid, and adjustable timer to control rate of valve opening

pressure regulator... LP style regulator to drop supply air pressure to usable air pressure

filter media...P95 filter material to filter out any oil to prevent mechanical pneumonia

clear plastic tubing, connect to nasal pharangeal airway for non ER intubation

Top
#295515 - 03/31/20 11:19 AM Re: MacGyvering the coronavirus [Re: brandtb]
Ren Offline
Addict

Registered: 11/05/07
Posts: 543
Loc: Wales, UK
I believe they also enrich the air with oxygen.

Top
#295516 - 03/31/20 12:37 PM Re: MacGyvering the coronavirus [Re: Ren]
nursemike Offline
Old Hand

Registered: 11/09/06
Posts: 870
Loc: wellington, fl
Measuring the effective operation of the lungs requires measuring peripheral blood oxygenation. Pulse oximeters, which shine red light throught the finger or earlobe, measure the saturation of red blood cells by color. I bought one at walgreens for about $40. This will let me know if I, or the 88 and 98 year old in my care, are decompensating. Lets me give the 911 operator a better idea of what's going on.

Course of illness of first 12 patients with Covid-19 :
None required a vent, apparently. Caveat:if any of the information in the article is confusing to you, you probably shouldn't be playing around with a ventilator.

Successful use of a ventilator requires aintubation with a cuffed endotracheal tube. Anesthesiologists created field expedient et tubes with condoms. If you do not have intubation supplies and skills, see Caveat.

Successful use of a ventilator requires
-a large supply of medical grade oxygen
-access to anesthesia, sedation, and analgesic drugs
-IV access and fluids
-assessment skills sufficient to diagnose misplaced et tube, subcutaneous emphysema, pneumothorax, pneumo-mediastinum, esophogeal intubation.
-arterial blood gas monitoring capability to detect alkalosis/acidosis, pH and HCO3 levels.

If you don't have these things, see caveat. I worked with patients on vents in ICU's and ers for a long time. It's complicated. Moreover, vents don't save everybody. If the lung tissue is thoroughly compromised,ventlators don't work. The alternative is ECMO Which is so difficult to use that no one is even talking about it.

Most of the patients who heve respiratory distress need supplemental oxygen: it might be productive to look into builing a home oxygen concentrator

If you want to go to the moon, you don't start by building a rocket ship: you start by studying physics.

IMHO/YMMV
_________________________
Dance like you have never been hurt, work like no one is watching,love like you don't need the money.

Top
#295517 - 03/31/20 12:48 PM Re: MacGyvering the coronavirus [Re: brandtb]
nursemike Offline
Old Hand

Registered: 11/09/06
Posts: 870
Loc: wellington, fl
My apologies, all.
If building a diy ventilator helps you cope with this hideous situation, by all means do so.
It beats the hell out of doing nothing.
The US Gummint tried to do something similar. https://www.nytimes.com/2020/03/29/business/coronavirus-us-ventilator-shortage.html

They failed but not for practical reasons.

But do be careful out there.
_________________________
Dance like you have never been hurt, work like no one is watching,love like you don't need the money.

Top
#295533 - 04/01/20 09:31 AM Re: MacGyvering the coronavirus [Re: brandtb]
Ren Offline
Addict

Registered: 11/05/07
Posts: 543
Loc: Wales, UK

Top
#295536 - 04/01/20 07:59 PM Re: MacGyvering the coronavirus [Re: brandtb]
gulliamo Offline
Member

Registered: 09/11/02
Posts: 181
Loc: Denver, CO, USA
Would these help? (Obviously, one would require a truck-load of them...)

https://www.rei.com/product/144881/boost-oxygen-canister-10-liters?CAWELAID

Top
Page 1 of 2 1 2 >



Moderator:  Alan_Romania, Blast, chaosmagnet, cliff 
November
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
Who's Online
0 registered (), 924 Guests and 18 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
Aaron_Guinn, israfaceVity, Explorer9, GallenR, Jeebo
5370 Registered Users
Newest Posts
Leather Work Gloves
by KenK
11/24/24 06:43 PM
Satellite texting via iPhone, 911 via Pixel
by Ren
11/05/24 03:30 PM
Emergency Toilets for Obese People
by adam2
11/04/24 06:59 PM
For your Halloween enjoyment
by brandtb
10/31/24 01:29 PM
Chronic Wasting Disease, How are people dealing?
by clearwater
10/30/24 05:41 PM
Things I Have Learned About Generators
by roberttheiii
10/29/24 07:32 PM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit
Glossary
Test

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.