Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Page 1 of 3 1 2 3 >
Topic Options
#289364 - 06/13/18 05:25 PM Gun that fits an Altoid's Tin
clearwater Offline
Old Hand

Registered: 03/19/05
Posts: 1185
Loc: Channeled Scablands


Edited by clearwater (06/13/18 05:36 PM)

Top
#289370 - 06/13/18 07:16 PM Re: Gun that fits an Altoid's Tin [Re: clearwater]
haertig Offline
Pooh-Bah

Registered: 03/13/05
Posts: 2322
Loc: Colorado
It may fit in an Altoids Tin, but what purpose would it serve? For personal protection, well, after you take the requisite 5 minutes to extract and deploy it, the threat will already be gone (or you dead). Most likely you'd end up shooting yourself with it though, due to it's awkwardness and quite unsafe-looking profile. For sustenance hunting, you'd probably do better with a slingshot. That toy is not going to be accurate at all. One: because of it's overall design, Two: because it doesn't even have any sights! You would be lucky to hit a dinner plate with it from two feet out.

Top
#289373 - 06/13/18 07:32 PM Re: Gun that fits an Altoid's Tin [Re: clearwater]
hikermor Offline
Geezer in Chief
Geezer

Registered: 08/26/06
Posts: 7705
Loc: southern Cal
Where are the rails for mounting telescopic sights?

Do you call "King's X" when you must reload?

This is a joke and a fairly expensive one at that although the MSRP isn't mentioned....
_________________________
Geezer in Chief

Top
#289374 - 06/13/18 08:10 PM Re: Gun that fits an Altoid's Tin [Re: clearwater]
chaosmagnet Offline
Sheriff
Carpal Tunnel

Registered: 12/03/09
Posts: 3842
Loc: USA
I'm not a big fan of .22 LR for defensive purposes, and I'm rather less of a fan of very small pistols for taking small game. I like the idea of .22 LR takedown rifles for survival hunting a lot more.

Top
#289375 - 06/13/18 08:12 PM Re: Gun that fits an Altoid's Tin [Re: clearwater]
gonewiththewind Offline
Veteran

Registered: 10/14/08
Posts: 1517
I see no use for this in taking game, and very little in self defense. It is a gimmick and nothing more, unless it is intended for illegal activities.

Top
#289379 - 06/13/18 09:13 PM Re: Gun that fits an Altoid's Tin [Re: chaosmagnet]
hikermor Offline
Geezer in Chief
Geezer

Registered: 08/26/06
Posts: 7705
Loc: southern Cal
Originally Posted By: chaosmagnet
I'm not a big fan of .22 LR for defensive purposes, and I'm rather less of a fan of very small pistols for taking small game. I like the idea of .22 LR takedown rifles for survival hunting a lot more.


I hear you on that. I have used an AR-7 for many years, mostly plinking, but if were to get hungry, it would do the job. The newer versions can accept telescopic sights,etc. quite readily.
_________________________
Geezer in Chief

Top
#289418 - 06/14/18 03:50 PM Re: Gun that fits an Altoid's Tin [Re: clearwater]
clearwater Offline
Old Hand

Registered: 03/19/05
Posts: 1185
Loc: Channeled Scablands
It needs a laser and a magazine. And a 16" barrel.

Top
#289425 - 06/14/18 07:34 PM Re: Gun that fits an Altoid's Tin [Re: haertig]
M_a_x Offline
Veteran

Registered: 08/16/02
Posts: 1207
Loc: Germany
Guns like that have been around for about a century. They were designed for spies, assasins or resistance fighters. The Liberator pistol kind of falls in that category too. They were intended for close range use. Precission or fast deployment were not really required for that.
It may be a collectorīs item just like that Swiss revolver in caliber 2.34 mm.
_________________________
If it isnīt broken, it doesnīt have enough features yet.

Top
#289431 - 06/14/18 10:52 PM Re: Gun that fits an Altoid's Tin [Re: clearwater]
ireckon Offline
Pooh-Bah

Registered: 04/01/10
Posts: 1629
Loc: Northern California
I would not mind having a gun this small and in .22lr. However, I would prefer it to have a trigger guard and be non-folding. I am sure there is something out there like what I described. I have just not had the motivation to search.
_________________________
If you're reading this, it's too late.

Top
#289433 - 06/14/18 11:33 PM Re: Gun that fits an Altoid's Tin [Re: clearwater]
haertig Offline
Pooh-Bah

Registered: 03/13/05
Posts: 2322
Loc: Colorado
The smallest I know of is the NAA mini revolver. Comes in .22LR and also in .22Mag. I've shot both, didn't hit much with either one. They hold 5 shots. Seemed well enough made, and interesting to shoot just so I could say that I did. At the distance you could hit something with one of these, you could also stab it, and a knife would be more effective IMHO. But if you want small ... this is it.


Top
Page 1 of 3 1 2 3 >



Moderator:  Alan_Romania, Blast, cliff, Hikin_Jim 
November
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
Who's Online
0 registered (), 849 Guests and 21 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
Aaron_Guinn, israfaceVity, Explorer9, GallenR, Jeebo
5370 Registered Users
Newest Posts
Leather Work Gloves
by KenK
11/24/24 06:43 PM
Satellite texting via iPhone, 911 via Pixel
by Ren
11/05/24 03:30 PM
Emergency Toilets for Obese People
by adam2
11/04/24 06:59 PM
For your Halloween enjoyment
by brandtb
10/31/24 01:29 PM
Chronic Wasting Disease, How are people dealing?
by clearwater
10/30/24 05:41 PM
Things I Have Learned About Generators
by roberttheiii
10/29/24 07:32 PM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit
Glossary
Test

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.