#23894 - 02/01/04 08:46 AM
Re: Do you standardize the size of batteries used?
|
Anonymous
Unregistered
|
I don't, I placed my light and batteries in the SOB enhanced medic bag. It's difficult to standardise.
|
Top
|
|
|
|
#23897 - 02/02/04 01:22 PM
Re: Do you standardize the size of batteries used?
|
Addict
Registered: 05/04/02
Posts: 493
Loc: Just wandering around.
|
Reference NiMh shelf life. I have found quite a bit of variability in shelf life between brands. Years ago I called eveready and they said 3%/day discharge. But I know there was a product change and it got much better. Still, not as good as disposable alkaline. Best so far for me is eveready NH-15 which is a 1850 mah AA battery. Radio shack seems to be far worse. I keep some eveready NH-15's in two FRS radios in the truck and they seem to last a long time (weeks) and are still functional. Check the eveready site www.energizer.com for spec. sheets. No shelf life given though. RS batteries fail quickly and I have a big pile of them that have begun to leak. Guess I should run a shelf life test on the NH-15's. If I do, someday, I will post results.
_________________________
...........From Nomad.........Been "on the road" since '97
|
Top
|
|
|
|
#23898 - 02/02/04 01:53 PM
Re: Do you standardize the size of batteries used?
|
Carpal Tunnel
Registered: 12/26/02
Posts: 2997
|
Thanks for the info. I'll pick up a set of the energizer and try them out. The ones I have are Sanyo 1650mAH I bought a couple years ago. They worked well at first, ran my digicam through two 16m cf cards on the same set of batteries. Now I have to swap around just to get the camera to turn on. I didn't treat them as well as I should, the digicam forums all say to keep them together in sets and such, I would just grab the first three that were charged. I got to where I stopped using them in anything else because I feared that they would be dead when I tried to use them.
|
Top
|
|
|
|
#23899 - 02/02/04 05:44 PM
Re: Do you standardize the size of batteries used?
|
Addict
Registered: 11/11/03
Posts: 572
Loc: Nevada
|
I have one of the Nitrolon Z-2 that is now EDC, bought a new forearm for my shotgun that has a built in Surefire and I found a good discount on a 6-P. Surefire has a good site and will send a really nice, informative catalog. I just weighed the cost , features and my expected use before I decided. The Nitrolon Z-2 worked well at an MVA the other night.
|
Top
|
|
|
|
#23900 - 02/02/04 06:43 PM
Re: Do you standardize the size of batteries used?
|
Registered: 11/14/03
Posts: 1224
Loc: Milwaukee, WI USA
|
What about chargers that have an automatic drain-down system before starting to recharge.
Might this help remove the requirement of using consistent pairs of batteries when grabbing recharged ones? If all the batteries you recharge are all drained down to nothing first before recharging, why would it matter if they were not originally paired?
Bountyhunter
|
Top
|
|
|
|
#23901 - 02/02/04 07:19 PM
Re: Do you standardize the size of batteries used?
|
Carpal Tunnel
Registered: 12/26/02
Posts: 2997
|
Full drains are not real helpful though. Newer battery technologies prefer to be topped opp rather than fully discharged. In the early NiCad days you wanted a charger that could drain before charging but not any more. NiMH and Lion have a limited number for full discharges.
|
Top
|
|
|
|
#23902 - 04/14/04 10:12 PM
Re: Do you standardize the size of batteries used?
|
Anonymous
Unregistered
|
Fwiw, the AccuManager 2020 charges AAA -> D cells, plus 9V, and understands NiCad, Nimh and rechargable alkaline. It's about fifty bucks, works nicely off 12V or mains and has some very funky battery reconditioning tech: I don't know what it does, but it's taken cells I thought were dead and brought them back to full service.
I gave up on complete standardization: I figure that having a range of sizes is actually a plus, for when you come across either unfamiliar equipment which needs feeding, or can only find some sizes in the store. I have one set of everything which runs on AAA, and another set which runs on AA.
|
Top
|
|
|
|
#23903 - 05/25/04 03:48 AM
Re: Do you standardize the size of batteries used?
|
Enthusiast
Registered: 07/06/02
Posts: 228
Loc: US
|
I tried to standardize on AA's only, mainly because of the advantages of the lithium cells--light weight, long shelf life, large storage capacity (relatively). Unfortunately, two essential items in my kits take AAA's only...my Tikka/Zipka's and my Sony FM/AM/TV/Weather radio. I really wish that the manufacturers of this kind of equipment would realize that the vastly greater power capacity of the AA's over the AAA's makes the AAA cell rather useless in comparison.
For example, an Energizer AA is rated at about 2850mAh versus 1250mAh for an Engergizer AAA. That means a AA packs about 2.28 times as much energy as a AAA!
It should also be mentioned that I try not to rely too much on battery powered devices. You can only carry so many batteries. But here's what I do have:
AA's 2ea Motorola Talkabout 6250 GMRS/FRS radios (and an FCC license, to boot) 1ea Sony ICF-SW7600G shortwave radio various lights (CMG's, Mag's)
AAA's 1ea Petzl Zipka (and/or Tikka, I have one of each) 1ea Sony SRF-M37V FM/AM/TV/Weather radio
At least, that's the important stuff--but then, of course, there's the cell phone (proprietary Li-Ion) and the Photon's (lithium coin cells); however, in the first case, I don't expect the cell phone to last longer than a day, and in the other, the coin cells are small and light enough not to be a bother.
_________________________
Gemma Seymour (she/her) @gcvrsa
|
Top
|
|
|
|
|
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
1 registered (Phaedrus),
375
Guests and
26
Spiders online. |
Key:
Admin,
Global Mod,
Mod
|
|
|