Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Page 2 of 3 < 1 2 3 >
Topic Options
#234995 - 11/02/11 05:22 PM Re: Stove of the Week: The Caldera Cone [Re: Chisel]
Hikin_Jim Offline
Sheriff
Pooh-Bah

Registered: 10/12/07
Posts: 1804
Loc: Southern California
Originally Posted By: Chisel
Thanks HJ

I appreciate your articles and blog

One question please

Methanol is too "light" as a fuel. Isopropanol is too "heavy" and does not burn easily. How about if we mix the two in 50:50 mix ??

Will the methanol help make the isoprpanol burn cleaner ???
Hi, Chisel,

I'm not completely sure what you mean by "methanol is too 'light'". Methanol works pretty well as a fuel. It's pretty popular. Methanol doesn't have quite the heat content of ethanol, and methanol is more toxic, but it works pretty well as a fuel.

As far as blending fuels, I've not tried nor do I know anyone who has tried blending methanol and isopropanol. I would think you'd have a blend that would a) smoke less and b) have a higher heat content per gram than pure methanol. Sounds like a worthwhile experiment. If you try it let us know how it works.

HJ
_________________________
Adventures In Stoving

Top
#235019 - 11/03/11 02:31 AM Re: Stove of the Week: The Caldera Cone [Re: Hikin_Jim]
Chisel Offline
Veteran

Registered: 12/05/05
Posts: 1563
What I meant is this (quote from your blog)

Quote:
Conversely, methanol can have "runaway thermal feedback" in hotter weather. "Runaway thermal feedback" basically occurs when the alcohol gets so hot that it boils really violently and doesn't burn efficiently.


Methanol burns "too easily, too quickly" , so mixing it with something that burns "not so well" may give us a fuel that is just right (similar to ethanol).

I would have tested the theory myself but in my neck of the woods ALL stoves around here are gas stoves. Esbit and alcohol stoves are never used by local campers. So, alcohol (methanol, denatured alcohol ..etc.) is non existant as a fuel in the camper market. I really don't know where to find them. Even gasoline additives ( HEET) does not exist here, and we have different brands which I may investigate.

Now, I know, you will ask ( if you can't get alcohol , why are you asking about it and how do you plan to use it ??)

OK. first, I am a prepper , not a routine type of camper. So, my stove needs may differ from the public. Second, around my work I found small quantities of methanol , iso propanol, denatured alcohol ..etc. And I plan to make a homemade alcohol stove and keep it for emergency use only if I had to bug-in the office due to bad weather or other problems, and power was out.. At the same time , I cannot use these in non-survival situation because the bilding is a no-smoking zone.

In the market , we have barbeque lighter fluid ..etc. but they are smoky and sooty , so they are definitely not methanol or denatured alcohol, maybe isopropanol or such.

Top
#235020 - 11/03/11 02:44 AM Re: Stove of the Week: The Caldera Cone [Re: Hikin_Jim]
Chisel Offline
Veteran

Registered: 12/05/05
Posts: 1563
Something else HJ

I am fascinated, no , I am OBSESSED with letting no atom of substance, or photon of energy, escape unused. What I mean is to have maximum efficiency possible. So, the caldera and few other designs ( like the Swiss Ranger stove) offer what I absolutely love in a stove which is a built-in windscreen to comletely surround the pot (almost hide it from view) and guide the heat to engulf the pot from all sides, not just the bottom. Even the escaping hot emissions, keep touching the pot to the last moment.

This is the same reason that I absolutely loved the rocket stove made of mud in some 3rd world countries ( seen in u-tubes) .

So, HJ, do you know more of such designs that minimizes escaping heat and focusing & condensing the heat around the pot ???


Top
#235021 - 11/03/11 03:04 AM Re: Stove of the Week: The Caldera Cone [Re: Hikin_Jim]
Hikin_Jim Offline
Sheriff
Pooh-Bah

Registered: 10/12/07
Posts: 1804
Loc: Southern California
Oh, I get it. Sorry, I didn't catch on with the terms "light" and "heavy".

I'm not sure that methanol burns "too quickly" or that isopropanol burns "not so well". It's a bit more complicated than that. In this situation, it has more to do with vapor pressures at a given temperature. BEFORE EVERYONE'S EYES GLAZE OVER, I won't bore you with the detail, but suffice it to say that in hot weather, methanol can boil so vigorously that you lose efficiency ("excessive" thermal feedback). In cooler weather, methanol is great.

Isopropanol actually puts out plenty of heat and doesn't have any trouble staying lit or anything like that. It's just that isopropanol doesn't burn cleanly.

The idea of mixing the two for hot weather (to avoid excessive thermal feedback in the methanol) has some merit, but I don't know how it would work. The isopropanol has a very high heat content and might just exacerbate the excessive thermal feedback. I haven't tried it.

Some people will mix just plain old water with their methanol to retard excessive thermal feedback. I'd say water is the way to go until we get some experiments done.

HJ
_________________________
Adventures In Stoving

Top
#235022 - 11/03/11 03:19 AM Re: Stove of the Week: The Caldera Cone [Re: Chisel]
Hikin_Jim Offline
Sheriff
Pooh-Bah

Registered: 10/12/07
Posts: 1804
Loc: Southern California
Originally Posted By: Chisel
Something else HJ

I am fascinated, no , I am OBSESSED with letting no atom of substance, or photon of energy, escape unused. What I mean is to have maximum efficiency possible. So, the caldera and few other designs ( like the Swiss Ranger stove) offer what I absolutely love in a stove which is a built-in windscreen to comletely surround the pot (almost hide it from view) and guide the heat to engulf the pot from all sides, not just the bottom. Even the escaping hot emissions, keep touching the pot to the last moment.

This is the same reason that I absolutely loved the rocket stove made of mud in some 3rd world countries ( seen in u-tubes) .

So, HJ, do you know more of such designs that minimizes escaping heat and focusing & condensing the heat around the pot ???

If you really want efficiency, check out a Trangia 25 series or Trangia 27 series stove. They're pricey, but they are going to extract every last erg out of the alcohol.

A (much) cheaper version is the knockoff Ledmark set. They're available at campmor.com for $20.00: Ledmark Alcohol Cookset.

The Caldera Cone is a cottage industry product and is a little pricey. For bugging in, the weight isn't going to be as big of an issue, and the Ledmark set will do you.

As far as fuel, check out a paint or hardware store. If there's a marine store near you, check out fuel for stoves on boats. Denatured alcohol is pretty available across the US. Methylated spirits are often available elsewhere. Methyl hydrate is sold in Canada and will work in alcohol stoves (I believe it's methanol).

Charcoal lighter fluid is typically petroleum based. I wouldn't use it in an alcohol stove.

HJ

Note: I have no affiliation with any product or site mentioned in this post (other than my blog I mean).
_________________________
Adventures In Stoving

Top
#235075 - 11/04/11 02:45 AM Re: Stove of the Week: The Caldera Cone [Re: Hikin_Jim]
Chisel Offline
Veteran

Registered: 12/05/05
Posts: 1563
Quote:
Some people will mix just plain old water with their methanol to retard excessive thermal feedback.


Reminds me of Sterno which is roughly 30% water and 70% ethanol.
Sterno's flame is not very hot but who knows, if you use it within a very effieicent system like caldera or Ledmark, maybe we have the most feasible combo.

The ledMark design gives me an idea. Maybe all I have to do is use a can instead of the cone . I can visit a store and choose a can of something ( Nido powdered milk for example) and a pot that can go inside ( held in place by the lip of the rim). Remove the bottom of the can. Drill holes near the bottom for air inlet, and holes near the top for emmission exit. Volia, A "caldera cylinder" LOL.

To operate, ignite a Sterno can , put the "Caldera cylinder" around it , and insert the pot inside top of the can.

It will all depend on finding the right fitting pot and can. And the can should not be too tall. Maybe the medium sized Nido can will do, but have to find a fitting pot.

What do you think ??
Sounds simple and doable, unless I am missing something.

Top
#235077 - 11/04/11 03:16 AM Re: Stove of the Week: The Caldera Cone [Re: Hikin_Jim]
Hikin_Jim Offline
Sheriff
Pooh-Bah

Registered: 10/12/07
Posts: 1804
Loc: Southern California
A can instead of a cone might work, but I doubt it would be as efficient. Stoves like the Ledmark etc. are pretty well tuned to get the airflow right. You want cool, oxygen rich air entering from the bottom, flowing up past the burner and then up the sides of the pot in a controlled fashion that doesn't allow any outside gusts to rob you of heat.

The burner itself needs to be of a proper design so as to get the air/fuel mix right. Sterno cans are hardly the ideal stove. They're pretty lean on the air. Sterno is designed for long slow heat and really isn't all that good for cooking, more for keeping something warm.

When the Ledmark is only $20.00 I guess I'd probably just go for the Ledmark which comes pretty well recommended by the guys I've talked to who have one. Of course if you're into DIY, you could try a can stove and see if it works well.

HJ
_________________________
Adventures In Stoving

Top
#235085 - 11/04/11 08:13 AM Re: Stove of the Week: The Caldera Cone [Re: Hikin_Jim]
hikermor Offline
Geezer in Chief
Geezer

Registered: 08/26/06
Posts: 7705
Loc: southern Cal
I have fashioned a "semi-Caldera cone" using aluminum flashing and tent stakes. Compared to a can, the rig can be rolled up compactly with a canteen and pot. In testing, it has worked very well. The cost was trivial (under $4). The only drawback is the method of fastening - nuts and bolts. Very secure, but fiddly.
_________________________
Geezer in Chief

Top
#235114 - 11/04/11 07:51 PM Re: Stove of the Week: The Caldera Cone [Re: Hikin_Jim]
7point82 Offline
Addict

Registered: 11/24/05
Posts: 478
Loc: Orange Beach, AL
Ok Jim. You pushed me over the edge. I was already considering a Ti-Tri for my MSR Titan Kettle. Gonna have to get one ordered asap.
_________________________
"There is not a man of us who does not at times need a helping hand to be stretched out to him, and then shame upon him who will not stretch out the helping hand to his brother." -Theodore Roosevelt

Top
#235116 - 11/04/11 08:22 PM Re: Stove of the Week: The Caldera Cone [Re: hikermor]
Hikin_Jim Offline
Sheriff
Pooh-Bah

Registered: 10/12/07
Posts: 1804
Loc: Southern California
Originally Posted By: hikermor
I have fashioned a "semi-Caldera cone" using aluminum flashing and tent stakes. Compared to a can, the rig can be rolled up compactly with a canteen and pot. In testing, it has worked very well. The cost was trivial (under $4). The only drawback is the method of fastening - nuts and bolts. Very secure, but fiddly.
At the end of my Caldera Cone blog post, I added a video of someone making a "Caldera clone." This is just a video I saw on the internet that I thought might be of interest. I bring this up because he made opposing folds in the ends of his cone that, when slipped together, held the windscreen in a conical shape.

HJ
_________________________
Adventures In Stoving

Top
Page 2 of 3 < 1 2 3 >



Moderator:  Alan_Romania, Blast, chaosmagnet, cliff 
November
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
Who's Online
0 registered (), 813 Guests and 2 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
Aaron_Guinn, israfaceVity, Explorer9, GallenR, Jeebo
5370 Registered Users
Newest Posts
Leather Work Gloves
by dougwalkabout
11/16/24 05:28 PM
Satellite texting via iPhone, 911 via Pixel
by Ren
11/05/24 03:30 PM
Emergency Toilets for Obese People
by adam2
11/04/24 06:59 PM
For your Halloween enjoyment
by brandtb
10/31/24 01:29 PM
Chronic Wasting Disease, How are people dealing?
by clearwater
10/30/24 05:41 PM
Things I Have Learned About Generators
by roberttheiii
10/29/24 07:32 PM
Gift ideas for a fire station?
by brandtb
10/27/24 12:35 AM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit
Glossary
Test

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.