Todd W...you might be interested in a pervious post of mine.. I made a siphon hose with prime bulb to run my Honda3500ES generator...it gravity siphons directly from elevated 6gal can...mine has easy access the 1/4 inch fuel line inlet on the carb...used a brass 1/4 barb x 1/4 male to a 5/16 barb x 1/4 female fitting to make the adapter to the fuel inlet hose...7feet of automotive fuel line, 1ft 1/4 inlet line, bulb from WallMart...if doing it again would select a 3/8 diameter for the fuel line as having more utility... siphon alone would make transfer easier, especially with some form of valve at terminal end...