#209331 - 10/08/10 03:43 PM
Re: Fire Starters in FREEZING CONDITIONS
[Re: ireckon]
|
Addict
Registered: 12/06/07
Posts: 418
Loc: St. Petersburg, Florida
|
Like Doug_SE_MI I have relied on strike anywhere matches in a good matchbox in wild places all over the world for 50 years. Although many consider them unreliable, Even in real emergencies I have never NEEDED anything else (I have used lots of other methods). I have upgraded my emergency match case (the everyday one still carries strike anywhere) to REI StormProof matches with a striker. I back these up with the stuff in my AMK/Ritter pocket kit and some extra tinder quick (PJ cotton balls are slightly better, but often a mess). Usually a cerro rod somewhere. The key addition, for all these lighting methods I carry some kindling - 4 inch squares of t-shirt dipped in paraffin. Can be lit with a match when wet in pretty wild weather and several minutes of hot flame. Like a candle on steroids, but LOTS easier to carry. A couple of them in a plastic bag fit flat in a pocket or pack.
The best,
Jerry
PS the flare is often there for other reasons but is a GREAT starter. Don't put it back, use it all up (or shorten it as described above). The metal cased survival flares are much better than the railroad (automotive) type.
|
Top
|
|
|
|
#209351 - 10/08/10 10:23 PM
Re: Fire Starters in FREEZING CONDITIONS
[Re: ireckon]
|
Geezer in Chief
Geezer
Registered: 08/26/06
Posts: 7705
Loc: southern Cal
|
The best fire starter I ever carried was a carbide lamp - heat and illumination on one handy package. Unfortunately, they are now realistically obsolete. In critical situations, strike anywhere matches have worked fine for me over decades. The secret is to have, or collect, adequate tender and small stuff.
A small piece of surgical tubing is a huge benefit in coaxing flames. The tubing is also multi-use. We used the tubing in our bolt kit (rock climbing) to start fires and also collect water from inaccessible crevices.
_________________________
Geezer in Chief
|
Top
|
|
|
|
#209382 - 10/09/10 06:33 PM
Re: Fire Starters in FREEZING CONDITIONS
[Re: Phaedrus]
|
Veteran
Registered: 12/12/04
Posts: 1204
Loc: Nottingham, UK
|
On the topic of unconventional fire starters you could also carry two vials, one with glycerine and one with potassiam permangantate. Mix the two, then stand back and wait for the fireworks. I wouldn't rely on that in cold weather. It's worth considering cotton balls impregnated with candle wax rather than petroleum jelly. Use wax from good quality candles, not cheap tea-lights. Wax is less messy than jelly. Whatever you carry, make sure you can make it work when wearing gloves. It's good to have a one-handed solution, too. If you are snowboarding of piste and get into difficulties, it's quite likely to be because you got injured. Hopefully you won't be alone, so it's worth having something that whoever is with you can use. I'm not a fan of Zippo usually, but it seems to fit the bill here.
_________________________
Quality is addictive.
|
Top
|
|
|
|
#209477 - 10/11/10 06:09 AM
Re: Fire Starters in FREEZING CONDITIONS
[Re: Brangdon]
|
Enthusiast
Registered: 09/10/08
Posts: 382
|
Use wax from good quality candles, not cheap tea-lights. Why? What do you consider a good quality candle? I don't think it will make a difference. Wax is less messy than jelly. I'd say that wax is more solid than jelly, and jelly is more sticky than wax, but the messiness is entirely dependent upon storage/handling. If you keep the jelly/cotton balls contained (bag, vial), and you fish them out using your kindling (twig, paper), your hands will remain jelly free.
|
Top
|
|
|
|
#209480 - 10/11/10 06:54 AM
Re: Fire Starters in FREEZING CONDITIONS
[Re: EMPnotImplyNuclear]
|
Old Hand
Registered: 06/03/09
Posts: 982
Loc: Norway
|
My solution to the sticky petroleum jelly cotton balls is cling film or whatever the rolls of plastic film you use on leftover food in the fridge is called (the thin plastic will stick ("cling") to most dry surfaces, included itself). Just roll the PJ cotton balls in cling film, then stick the roll into whatever container you're using.
In really high temperatures I would expect some petroleum jelly to become liquid and make its way out of the cling film roll, but really high temperatures is not a problem where I live.
|
Top
|
|
|
|
#209503 - 10/11/10 08:26 PM
Re: Fire Starters in FREEZING CONDITIONS
[Re: ireckon]
|
Member
Registered: 01/25/06
Posts: 144
Loc: Nevada
|
I need fire starters for when I go off piste snowboarding. Currently, my system includes the following:
1. Peanut Lighter packed with waterproof tinder. 2. Ferro rod packed with waterproof tinder. 3. Sparker or another ferro rod packed with waterproof tinder. (I'm leaning toward another ferro rod for this third position.)
I yet have to practice fire starting in freezing conditions up on the mountain. Do any of you have experience that will help me? I would suggest a road flare. Okay it is one shout but when you need fire you need fire. cheers
|
Top
|
|
|
|
#209535 - 10/12/10 07:55 AM
Re: Fire Starters in FREEZING CONDITIONS
[Re: Paul810]
|
Addict
Registered: 04/21/05
Posts: 484
Loc: Anthem, AZ USA
|
If your cotton ball/vaseline combo is messy, you are using too much vaseline.
In fact, I've found too much vaseline is actually quite a bad thing, as it can make it difficult to for the cotton to catch a spark. My experience too with first attempts, years ago ... massaged unheated PJ into cotton balls but found difficult to remove excess PJ. Current method: heat golf ball-size chunk of PJ in microwave at half-power 30 seconds or so until liquid; submerge cotton balls, then squeeze one-at-a-time in garlic press to remove excess PJ. Good saturation; not messy; finished cotton balls nicely compressed; easy ignition with ferro rod (after 'fluffing' to expose fibers); good burn time. And my third-level firestarting method/gear: windproof/waterproof matches. But only REI and UCO Stormproof. For their size, I've found nothing that has the same "explosive ignition" sometimes required for less-than-optimum tinder/conditions. They're like mini-road flares. I know the arguments against: once they're used/gone, they're gone; and they require a special striker. I don't sweat the striker-issue ... carry plenty of "waterproofed" spares not only with other gear, but on my person. Consider the dozen or so matches I carry to be adequate third-tier back-up.
_________________________
"Things that have never happened before happen all the time." — Scott Sagan, The Limits of Safety
|
Top
|
|
|
|
#209603 - 10/13/10 04:58 PM
Re: Fire Starters in FREEZING CONDITIONS
[Re: ireckon]
|
Enthusiast
Registered: 04/05/08
Posts: 288
Loc: Europe
|
So, you know how it is. I suffer from the condition known as "Hands-Get-Cold-Easily". Starting a fire when it's -10F is a skill I will be improving this winter. I don't suffer from this but once on a night winter trip I wore insufficient gloves. Already during the wood gathering phase my hands became pretty cold so I lit a candle and warmed them every now and then until I got the fire going. It helped a lot. I also agree with others about the fatwood. It is a great option. I did some tests with "Maya sticks" including water resistence test and they worked very well. I recommend preparing the various forms and sizes of fatwood in advance. 1. No preparation and no wasted time when you need the fire ASAP 2.Having a big piece of wood in your pocket could hurt more than ziplock bag full of kindling chips when you fall during snowboarding. Just for illustration - some of my pre-made tinder/kindling:
|
Top
|
|
|
|
|
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
0 registered (),
697
Guests and
14
Spiders online. |
Key:
Admin,
Global Mod,
Mod
|
|
|