Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Page 2 of 2 < 1 2
Topic Options
#196708 - 02/27/10 10:22 AM Re: Apologies to OldSoldier and other Square Knot Fans [Re: Art_in_FL]
hikermor Offline
Geezer in Chief
Geezer

Registered: 08/26/06
Posts: 7705
Loc: southern Cal
I have personally witnessed a well tied single overhand knot come undone twice. Any knot should be backed up.
_________________________
Geezer in Chief

Top
#201800 - 05/14/10 02:46 AM Re: Apologies to OldSoldier and other Square Knot Fans [Re: hikermor]
ireckon Offline
Pooh-Bah

Registered: 04/01/10
Posts: 1629
Loc: Northern California
Zeppelin bend is my favorite for joining ropes of the same diameter.

Double sheet bend is my favorite for joining ropes of different diameter.
_________________________
If you're reading this, it's too late.

Top
#201822 - 05/14/10 07:18 PM Re: Apologies to OldSoldier and other Square Knot Fans [Re: haertig]
Glock-A-Roo Offline
Old Hand

Registered: 04/16/03
Posts: 1076
Originally Posted By: haertig
But why would he use a knot that is less strong than others (like just using a double fishermans as the bend in the first place)? With modern ropes, sure, having a square knot eat up half of the ropes original strength is adequate for rapelling. But why would one go to the trouble of tying a square knot, and then two double fishermans knots as backups when they could have just tied one double fishermans in the first place...


Because rapping on 2 ropes tied together with a double fisherman's can be quite hard to untie, especially if the rope got wet or you're rapping with heavy loads (i.e. haulbags while retreating from a big wall). The square knot keeps the fisherman's from cinching down tight on itself.

BillyM is correct about the overhand w/ long tails. It's also been known as the EDK (Euro Death Knot) after its importation from Europe. The body of the EDK stays to one side of the loaded lines and thus has less tendency to hang up over edges when pulled. It's very simple to tie when tired & cold.

The IntardNet used to rage with arguments against the EDK but most accept it now.

Top
#201829 - 05/14/10 08:53 PM Re: Apologies to OldSoldier and other Square Knot Fans [Re: Glock-A-Roo]
ILBob Offline
Old Hand

Registered: 02/05/10
Posts: 776
Loc: Northern IL
I'd be nervous about using a square knot without a backup knot in a case where it had to hold, as it upsets very easily if you pull on a tag end the "right" way.

However that very feature makes it a great shoe tying knot.
_________________________
Warning - I am not an expert on anything having to do with this forum, but that won't stop me from saying what I think. smile

Bob

Top
#201830 - 05/14/10 09:00 PM Re: Apologies to OldSoldier and other Square Knot Fans [Re: Glock-A-Roo]
ireckon Offline
Pooh-Bah

Registered: 04/01/10
Posts: 1629
Loc: Northern California
Originally Posted By: Glock-A-Roo
Originally Posted By: haertig
But why would he use a knot that is less strong than others (like just using a double fishermans as the bend in the first place)? With modern ropes, sure, having a square knot eat up half of the ropes original strength is adequate for rapelling. But why would one go to the trouble of tying a square knot, and then two double fishermans knots as backups when they could have just tied one double fishermans in the first place...


Because rapping on 2 ropes tied together with a double fisherman's can be quite hard to untie, especially if the rope got wet or you're rapping with heavy loads (i.e. haulbags while retreating from a big wall). The square knot keeps the fisherman's from cinching down tight on itself.

BillyM is correct about the overhand w/ long tails. It's also been known as the EDK (Euro Death Knot) after its importation from Europe. The body of the EDK stays to one side of the loaded lines and thus has less tendency to hang up over edges when pulled. It's very simple to tie when tired & cold.

The IntardNet used to rage with arguments against the EDK but most accept it now.


Isn't the square going to jam anyway? He put a jamming knot (square) in the middle of another jamming knot (fisherman). So, that square would be even harder to take apart.

As you indicated, it looks like a simple overhand w/ long tails is just as good or better than the square backed up with a fisherman.

Also, the Zeppelin bend is great, but I don't know how good it is for mountain climbing because I don't mountain climb. The Zeppelin bend is a rare knot in that it has all the best qualities: non-jamming, non-slipping, strong (80%) and simple. I was amazed when I used it. Here is an article:

http://www.survivaltopics.com/survival/how-to-make-a-zeppelin-bend-knot/
_________________________
If you're reading this, it's too late.

Top
#201838 - 05/15/10 02:08 AM Re: Apologies to OldSoldier and other Square Knot Fans [Re: ireckon]
Oware Offline
Newbie

Registered: 10/23/09
Posts: 42
Loc: 49th parallel
Originally Posted By: ireckon
Originally Posted By: Glock-A-Roo
[quote=haertig]
BillyM is correct about the overhand w/ long tails. It's also been known as the EDK (Euro Death Knot) after its importation from Europe. The body of the EDK stays to one side of the loaded lines and thus has less tendency to hang up over edges when pulled. It's very simple to tie when tired & cold.

The IntardNet used to rage with arguments against the EDK but most accept it now.



The EDK is NOT an overhand knot. It is a Figure Eight knot.
It can roll at rappel forces. The overhand not so much.
_________________________
blog.owareusa.com

Top
Page 2 of 2 < 1 2



Moderator:  Alan_Romania, Blast, cliff, Hikin_Jim 
November
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
Who's Online
1 registered (chaosmagnet), 879 Guests and 5 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
Aaron_Guinn, israfaceVity, Explorer9, GallenR, Jeebo
5370 Registered Users
Newest Posts
Missing Hiker Found After 50 Days
by Ren
Yesterday at 02:25 PM
Leather Work Gloves
by KenK
11/24/24 06:43 PM
Satellite texting via iPhone, 911 via Pixel
by Ren
11/05/24 03:30 PM
Emergency Toilets for Obese People
by adam2
11/04/24 06:59 PM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit
Glossary
Test

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.