Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Page 4 of 5 < 1 2 3 4 5 >
Topic Options
#184177 - 10/03/09 06:32 PM Re: How decide how much to help and share? [Re: adam2]
Susan Offline
Geezer

Registered: 01/21/04
Posts: 5163
Loc: W. WA
"I also keep a dozen homemade disposable battery lights, they are cheaper than chemical light sticks, give more light, for longer, and can be turned off."

Please explain.

Sue

Top
#184248 - 10/04/09 03:58 PM Re: How decide how much to help and share? [Re: Susan]
Compugeek Offline
Enthusiast

Registered: 08/09/09
Posts: 392
Loc: San Diego, CA
Originally Posted By: Susan
"I also keep a dozen homemade disposable battery lights, they are cheaper than chemical light sticks, give more light, for longer, and can be turned off."

Please explain.

Sue
Seconded. Google left me empty.
_________________________
Okey-dokey. What's plan B?

Top
#184251 - 10/04/09 04:49 PM Re: How decide how much to help and share? [Re: Compugeek]
scafool Offline
Pooh-Bah

Registered: 12/18/08
Posts: 1534
Loc: Muskoka
I am not sure if I have his home made light idea right, but I think if you google "Throwies" you might find something.

I suspect you can live without the magnet, but I could see it coming in handy if you want to stick the light some place with a steel surface to attach it to.
_________________________
May set off to explore without any sense of direction or how to return.

Top
#184301 - 10/05/09 06:56 AM Re: How decide how much to help and share? [Re: Compugeek]
adam2 Offline
Addict

Registered: 05/23/08
Posts: 483
Loc: Somerset UK
Originally Posted By: Compugeek
Originally Posted By: Susan
"I also keep a dozen homemade disposable battery lights, they are cheaper than chemical light sticks, give more light, for longer, and can be turned off."

Please explain.

Sue
Seconded. Google left me empty.


These are very simple, some would say crude.

A plastic battery holder for 2D cells, with a 2.4 volt 0.7 amp flashlight bulb.
The bulb is soldered to two short pieces of wire, which are soldered to the terminals of the battery holder.
No switch is needed, insert batteries to light, remove batteries to turn off.

Run time 10 hours continous or about 15 hours total of intermitant use, with alkaline cells

Cost of battery holder about 25 pence, cost of bulb 5 pence, wire and solder ,estimate less than a penny.
Alkaline D cells if bought in bulk are less than £1.00 for two.

Total cost about £1.00/£1.25, glow sticks cost more than that and give a lot less light.

I also made some smaller versions with 2 AA cells and a 0.3 amp bulb, these are smaller and lighter in weight and use cheaper batteries, but the run time and light output are less.

Although very basic, these are reliable due to the small number of potential loose contacts.
They are cheap enough to give away, and I allways keep some to hand.

Top
#184303 - 10/05/09 08:54 AM Re: How decide how much to help and share? [Re: adam2]
MostlyHarmless Offline
Old Hand

Registered: 06/03/09
Posts: 982
Loc: Norway
Originally Posted By: adam2

A plastic battery holder for 2D cells, with a 2.4 volt 0.7 amp flashlight bulb.
The bulb is soldered to two short pieces of wire, which are soldered to the terminals of the battery holder.
No switch is needed, insert batteries to light, remove batteries to turn off.


Great thinking!

Those could easily be upgraded with LED replacements, such as this:
Niteize LED bulb replacement
The manufacturer claims 50 hours on 2 D cell batteries. Unverified, but likely.

The bad news is that the cold white LEDs will not create the atmosphere as a dimmed incan bulb when the family huddles up for noodles in the living room...

Top
#184304 - 10/05/09 09:03 AM Re: How decide how much to help and share? [Re: MostlyHarmless]
adam2 Offline
Addict

Registered: 05/23/08
Posts: 483
Loc: Somerset UK
The use of an LED retrofit would certainly greatly extend the run time, but a cost of $10/£6 would no longer be a throwaway item.

I also suspect that an LED retrofit bulb would be destroyed by the heat of soldering wires to it.

For my own use, not for giveaways I have some lights that use 4D cells and a miniture screw base bulb holder.
These use either a 5 volt 0.5 amp incandescent bulb for a run time of 20/30 hours or an screwbase LED lamp for 100+ hours.

Top
#184315 - 10/05/09 01:05 PM Re: How decide how much to help and share? [Re: adam2]
Compugeek Offline
Enthusiast

Registered: 08/09/09
Posts: 392
Loc: San Diego, CA
Slick. VERY slick.

_________________________
Okey-dokey. What's plan B?

Top
#184323 - 10/05/09 02:32 PM Re: How decide how much to help and share? [Re: Compugeek]
comms Offline
Veteran

Registered: 07/23/08
Posts: 1502
Loc: Mesa, AZ
Adam2 hits a good point about expensive gear vs. cheaper items. I actually go with cheaper gear on about 85% of my kit. Some items you just can't get away from b/c of bias. I invested in a RSK Mk1 but Moras are great too and 10% of the cost. But the bulk of my EDC and packs are very basic.

I destroy a lot of gear. When was the last time most people bought a magnesium block and used it down to the mishmash starter? Me, all the time. If I bought something b/c it's 'cool', and didn't put it through hardcore testing to see if it holds up, I might as well not have it at all.

Consequently, I have become a raving fan of some brands and will push people away from others. Its one thing to tell someone you own 'X' item, its another to say, I put that thing through the ringer and did great.
_________________________
Don't just survive. Thrive.

Top
#184361 - 10/05/09 07:20 PM Re: How decide how much to help and share? [Re: adam2]
LED Offline
Veteran

Registered: 09/01/05
Posts: 1474
Neat idea. But if you wanted to store the light with the batteries inside could you put a removable plastic spacer between the batteries?

Top
#184367 - 10/05/09 08:22 PM Re: How decide how much to help and share? [Re: LED]
dweste Offline
Pooh-Bah

Registered: 02/16/08
Posts: 2463
Loc: Central California
I approach the topic of the thread with the mindset that I always want a little something in reserve for myself and those closest to me.

I put the easiest to get to stuff in what I call modules or kits which in their smallest form are contained in sealed plastic freezer bags. I bundle a day's food per bag for example. Other bundles are complete personal toiletry sets probably good for 4-5 days. Water is primarily a purchased in individual plastic bottles.

I have bulk supplies in waterproof plastic tubs; almost all of which contain only large individually sealed containers. I have a lot of water in multi-gallon containers.

If pressed I would admit to a discrete duplicate stash of everything kept nearby but not readily visible or as easily accesible. I hope that not even looters or well-meaning do-gooders would find this stuff.

I have taken the same approach to my tools, hardware, lubricants, batteries, and everything else.

So, strangers or those passing through might get a plastic freezer bag or two, and some bottles of water. Closer family and friends might get aa bulk package or two plus several freezer bag kits, and a case or two of water in bottles.

This does not take into account my EDC or BOB which remain with me or under my control, nor does it include my vehicle "kit."


Edited by dweste (10/05/09 08:25 PM)

Top
Page 4 of 5 < 1 2 3 4 5 >



Moderator:  MartinFocazio, Tyber 
November
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
Who's Online
0 registered (), 584 Guests and 16 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
Aaron_Guinn, israfaceVity, Explorer9, GallenR, Jeebo
5370 Registered Users
Newest Posts
Leather Work Gloves
by KenK
11/24/24 06:43 PM
Satellite texting via iPhone, 911 via Pixel
by Ren
11/05/24 03:30 PM
Emergency Toilets for Obese People
by adam2
11/04/24 06:59 PM
For your Halloween enjoyment
by brandtb
10/31/24 01:29 PM
Chronic Wasting Disease, How are people dealing?
by clearwater
10/30/24 05:41 PM
Things I Have Learned About Generators
by roberttheiii
10/29/24 07:32 PM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit
Glossary
Test

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.