#173562 - 05/20/09 03:04 AM
Re: Want a flashlight that works FROZEN in ice?
[Re: JohnN]
|
Old Hand
Registered: 10/10/01
Posts: 966
Loc: Seattle, WA
|
As a major aside, I once did a similar test with a Casio G-Shock. I ran over it with the car (no problem), froze it in a block of ice (no problem), and boiled it.
The latter gave it a bit of pause and the LCD turned black. However, after a while the screen finally cleared and it continued to run. Pretty impressive.
On the other hand, while it was the first watch I avoided breaking to the point where it didn't operate, I did keep breaking the band where it met the watch -- the hole that received the pin got messed up and would no longer allow the band to be secured (which is what led it to being fodder for silliness like the above tests).
After that, I got a got a stainless Rolex GMT Master II, and I've worn it around the clock, everywhere, and it keeps time as well now as it did 20+ years ago. And hey, I haven't even managed to break the band. :-)
-john
|
Top
|
|
|
|
#173570 - 05/20/09 05:07 AM
Re: Want a flashlight that works FROZEN in ice?
[Re: JohnN]
|
Addict
Registered: 03/19/07
Posts: 690
|
What would you like to see in terms of a flashlight "torture test". Boiling, dropping, running over with a car, hitting with a hammer? What would be the ultimate test of durability? Shooting it with a .44 Magnum. For best results, you'd have to get Dirty Harry to come over and do the shooting himself. I guess that's about as macho as flashlight torture tests go. Oh yeah and maybe you ought to have some death metal playing in the background. Maybe less macho but more down to Earth would be just using that flashlight for about a year and see how it performs. If you're not a hardcore user, give that light to someone who is (military, law enforcement, firefighter etc.). You're likely to get the very best kind of feedback that way. Boiling, freezing, choking, smashing, throwing, chainsawing, lightsabring a flashlight and finally running it over with your car is all good but I fail to see much real-world application.
|
Top
|
|
|
|
#173574 - 05/20/09 07:31 AM
Re: Want a flashlight that works FROZEN in ice?
[Re: Tom_L]
|
Addict
Registered: 05/23/08
Posts: 483
Loc: Somerset UK
|
I would agree that some of the more extreme tests of flashlight durability are not relevant to likely use, even in extreme conditions.
The following might be more realistic
1) drop several times from above head height onto concrete 2) leave outdoors overnight, in the coldest weather in your area 3) submerge in water overnight 4) leave turned on in hot conditions, such as exposed to noon sun, or wrapped in a cloth (to simulate accidental turning on in pocket or luggage.
Any flashlight that can survive the above, should survive almost anything that its owner can.
|
Top
|
|
|
|
#173619 - 05/21/09 01:24 AM
Re: Want a flashlight that works FROZEN in ice?
[Re: MedXLT]
|
Newbie
Registered: 12/30/08
Posts: 40
Loc: WY/AK
|
What would you like to see in terms of a flashlight "torture test". Boiling, dropping, running over with a car, hitting with a hammer? What would be the ultimate test of durability? Personally, I don't worry much over torture tests. Give me a warranty like Pelican has. Pelican guarantees its products for a lifetime against breakage or defects in workmanship. Pelican cases are guaranteed to be watertight to a depth of 3 feet for 30 minutes (IP 67) unless otherwise stated if properly closed with undamaged o-ring in place. Pelican’s liability is limited to the case and not its contents. This guarantee does not cover the lamp or batteries (rechargeable or alkaline) for lights. Any liability, either expressed or implied, is limited to replacement of the product. This guarantee is void if the Pelican™ product has been abused beyond normal and sensible wear and tear. This guarantee does not cover shark bite, bear attack or damage caused by children under five. I can't tell you how many times I've given them a call and asked for replacement bezles, O-rings, battery trays, clips, etc etc etc and have had them in a matter of days free of charge. Sure I have the "fancy" LED lights (Surefire), but the light I use almost every day when at home is a close tie between my UKAA and my Pelican. The Pelicans have been used so much that I can't begin to tell you how many bulbs have been replaced, let alone batteries and miscellaneous replacement parts. The best "torture test" I've ever witnessed was a roughly 200 foot drop off of a contactor tower on a gas plant while working night shift. Light was on when it left the hand, and light was still on when it landed. Helped us find it after it bounced off the roof of the unit and skipped/slid across the pad into the grass. As for the UKAA, same goes as does for the Pelicans. The UK's have seen a little more cold weather useage (on and off several times a night shift in temps down to -60°F Ambient). Bulbs tend to last a bit longer in the UK's simply because of their size. Less inertia means less damage on impact when dropped, as well as making them less handy makeshift hammers... I consider those expensive lights nothing but flash. I've never seen a light worse on battery life then my Surefire. I'm sure that some peoples ideal flashlight is something aluminum and bright as daylight, but I don't need to use mine as a makeshift weapon. If I did, I'm sure the Pelican would hurt just as bad.
|
Top
|
|
|
|
#173638 - 05/21/09 12:12 PM
Re: Want a flashlight that works FROZEN in ice?
[Re: OilfieldCowboy]
|
Old Hand
Registered: 10/10/01
Posts: 966
Loc: Seattle, WA
|
Agreed: Pelican, UK, Surefire, Ra/HDS all make super tough lights. -john What a warranty should look like >>> http://www.surefire.com/guarantee THE SUREFIRE NO-HASSLE GUARANTEE
Lamps will burn out and batteries will be used up. Everything else is covered by our no-hassle guarantee: If it breaks, we fix it.
Edited by JohnN (05/21/09 12:12 PM)
|
Top
|
|
|
|
#173677 - 05/22/09 12:26 AM
Re: Want a flashlight that works FROZEN in ice?
[Re: JohnN]
|
Newbie
Registered: 12/30/08
Posts: 40
Loc: WY/AK
|
I guess the main reason I'm against Surefire is that little bit of info missing from the side of their lights that should read "Class 1 Div 2"
|
Top
|
|
|
|
#173717 - 05/24/09 01:13 AM
Re: Want a flashlight that works FROZEN in ice?
[Re: MedXLT]
|
Pooh-Bah
Registered: 09/01/07
Posts: 2432
|
What would you like to see in terms of a flashlight "torture test". Boiling, dropping, running over with a car, hitting with a hammer? What would be the ultimate test of durability? I don't know but a cop I know claims he converted an entire biker gang to horizontal with a five D-cell Maglight during a bar fight and it still worked. Or at least that's how he tells the story.
|
Top
|
|
|
|
#173756 - 05/25/09 11:18 AM
Re: Want a flashlight that works FROZEN in ice?
[Re: CJK]
|
Veteran
Registered: 12/12/04
Posts: 1204
Loc: Nottingham, UK
|
That is like my watch being waterproof to 660 ft. If I'm at 660 ft I have more to worry about than the waterproof integrity of my watch.... Some of this is about having a safety margin. The water-proof pressure numbers tend to be large because you get momentarily higher pressures. For example, 50m is the minimum you want for swimming, even if you are never going to swim down to a depth of 50m. Even for snorkelling you need 100m. 200m (which is your 660ft) is good for scuba diving. That's what my watch claims, and although I don't scuba I do snorkel and it's nice to have the difference as a safety margin.
_________________________
Quality is addictive.
|
Top
|
|
|
|
#173757 - 05/25/09 11:20 AM
Re: Want a flashlight that works FROZEN in ice?
[Re: MedXLT]
|
Veteran
Registered: 12/12/04
Posts: 1204
Loc: Nottingham, UK
|
I'd probably start with a trip though the washing machine. Admittedly if your washing machine is still working you're probably not in a survival situation, but it's a pretty harsh environment any pocketable device is likely to encounter.
_________________________
Quality is addictive.
|
Top
|
|
|
|
#173782 - 05/25/09 08:23 PM
Re: Want a flashlight that works FROZEN in ice?
[Re: Brangdon]
|
Enthusiast
Registered: 04/05/08
Posts: 288
Loc: Europe
|
That is like my watch being waterproof to 660 ft. If I'm at 660 ft I have more to worry about than the waterproof integrity of my watch.... Some of this is about having a safety margin. The water-proof pressure numbers tend to be large because you get momentarily higher pressures. For example, 50m is the minimum you want for swimming, even if you are never going to swim down to a depth of 50m. Even for snorkelling you need 100m. 200m (which is your 660ft) is good for scuba diving. That's what my watch claims, and although I don't scuba I do snorkel and it's nice to have the difference as a safety margin. Or when you dive from the block etc.
|
Top
|
|
|
|
|
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
0 registered (),
727
Guests and
22
Spiders online. |
Key:
Admin,
Global Mod,
Mod
|
|
|