Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Page 1 of 2 1 2 >
Topic Options
#108359 - 10/11/07 03:19 PM Time for a New Color Laser Printer
Doug_Ritter Offline

Pooh-Bah

Registered: 01/28/01
Posts: 2207
Our old HP Color Laser-Jet behemoth that we inherited from Sue's old employer has gone terminal and it's too expensive to fix it. frown Time to buy a new one. Must be able to to modest amount of color printing in a timely fashion, reliably and don't want to have to replace it in 12-18 months. Not quite a large office environment, but we often have to do multiple copies of 20+/- page printings and occasionally multiple 100+ page reports or proposals.

Prefer not to spend too large a fortune as we haven't got it to spend. <~>

Any suggestions or good/bad experiences?
_________________________
Doug Ritter
Editor
Equipped To Survive®
Chairman & Executive Director
Equipped To Survive Foundation
www.KnifeRights.org
www.DougRitter.com

Top
#108373 - 10/11/07 05:54 PM Re: Time for a New Color Laser Printer [Re: Doug_Ritter]
Kris Offline
Addict

Registered: 04/13/07
Posts: 627
Loc: A Canadian Back in Canada
I recommend HP printers all the way.

If you can blow 1k usd, this printer is worth going for:
http://h10010.www1.hp.com/wwpc/us/en/sm/WF25a/18972-18972-3328060-15077-3328071-2512208.html

Its ment to be a small office printer, that can do quite a bit of printing, and connect up to your network for multiple people to use.


If you need to go cheaper, then:
http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/18972-18972-3328060-15077-3328070-446153.html

It can't handle the volume of the other guy, but if your only doing about 1000 printed pages a month, it'll serve your purposes. I'm not sure of the quality of color it does, but black/white is pretty good.


You can also look into local photocopier dealers for leases of printers if you want to go that route. I'd stay away from getting a second hand printer below 2k usd (brand new), its just not worth the hassle.

Did you check into your local staples/photocopier/printing stores?

Or check online, like: http://www.colorprintingwholesale.com/?

Just ideas.
Kris
_________________________
"One should not increase, beyond what is necessary, the number of entities required to explain anything"
William of Ockham (1285-1349)

Top
#108378 - 10/11/07 06:16 PM Re: Time for a New Color Laser Printer [Re: Kris]
Doug_Ritter Offline

Pooh-Bah

Registered: 01/28/01
Posts: 2207
Thanks.

I've had mixed results with HP printers of late, admittedly not high end. While older models performed flawlessly for years, newer models seem to have bugs they never fix and QC issues. I am open to another manufacturer.
_________________________
Doug Ritter
Editor
Equipped To Survive®
Chairman & Executive Director
Equipped To Survive Foundation
www.KnifeRights.org
www.DougRitter.com

Top
#108397 - 10/11/07 08:57 PM Re: Time for a New Color Laser Printer [Re: Doug_Ritter]
Alex Offline
Old Hand

Registered: 03/01/07
Posts: 1034
Loc: -
We are using Xerox Phaser 8550 at UC Berkeley. It is Solid Ink printer, not exactly a laser printer. The print quality is the same or better. The prints durability is the same. I believe the colors reproduction quality is much better than that of Laser printers. Very reliable. The previous model 840 was working perfectly for 7 years in severe abuse environment (by students and post-doc's). Bought the new model 8550 a year ago, because they had a free new printer trade of promotion (just buy the ink from them often enough), and because the old one had many of its exterior plastic parts missing :-)

You can check the current promotions here (but the one I've mentioned was for education institutions only): http://www.office.xerox.com/perl-bin/product.pl?mode=rebate#rebate_color
They are offering a $500 trade of for the 8860 model (check your old printer model).


Edited by Alex (10/11/07 09:05 PM)

Top
#108421 - 10/12/07 01:24 AM Re: Time for a New Color Laser Printer [Re: Alex]
Kris Offline
Addict

Registered: 04/13/07
Posts: 627
Loc: A Canadian Back in Canada
Doug,

Then I suggest going to a site like http://www.newegg.com/ and going to the printer section and reviewing the reviews of customers.

Newegg is a an online geek heaven and they take the time to do up all the specs to every product, even take their own pics of all products from the box to out-of-the-box.

Good luck in your hunt!

Kris
_________________________
"One should not increase, beyond what is necessary, the number of entities required to explain anything"
William of Ockham (1285-1349)

Top
#108435 - 10/12/07 03:34 AM Re: Time for a New Color Laser Printer [Re: Kris]
GarlyDog Offline
ô¿ô
Old Hand

Registered: 04/05/07
Posts: 776
Loc: The People's Republic of IL
I concur with Alex. The Xerox Phaser 8550 is a realiable workhorse.
_________________________
Gary








Top
#108441 - 10/12/07 04:14 AM Re: Time for a New Color Laser Printer [Re: Doug_Ritter]
redflare Offline
Addict

Registered: 12/25/05
Posts: 647
Loc: SF Bay Area, CA
I agree about HP printers. We just had one go bad on us after less then 9 month of use. frown

We just purchased a new color laser printer from Costco.
Its a Xeros Phaser 6120N. It was shipped in 2 days! smile
So far prints are of good quality and its VERY fast, even when printing color prints.
Cnet review of it was pretty positive too.

Top
#108453 - 10/12/07 11:40 AM Re: Time for a New Color Laser Printer [Re: redflare]
Dragonscript Offline
Newbie

Registered: 12/19/06
Posts: 39
As an IT person i would NOT get a HP for several reason, and if you want them i can list them.

I also have the Xerox 8550 printers in my office and while they are very good they are not toner printers, they use solid ink that look/feel like cayrons. A better model in that class is the Xerox 6300/6350 or a used 6250 which are color toner based, and they have a lower cost per page.

A lower cost alternative is the 6180 which cost about half the price and is intended for lower volume of printing than the 6200/6300 series of printers.
_________________________
Learn to swim.
-Tool

Top
#108455 - 10/12/07 12:09 PM Re: Time for a New Color Laser Printer [Re: Dragonscript]
GarlyDog Offline
ô¿ô
Old Hand

Registered: 04/05/07
Posts: 776
Loc: The People's Republic of IL
I agree HP quality seems to has deteriorated over the past few years.

I was at an account on Friday where we determined that a 6 month old HP color laser needed to be replaced. The previous week, a fairly new B&W HP Laser printer needed to be replaced at a different client. I am loosing faith in HP.
_________________________
Gary








Top
#108459 - 10/12/07 01:14 PM Re: Time for a New Color Laser Printer [Re: Dragonscript]
Doug_Ritter Offline

Pooh-Bah

Registered: 01/28/01
Posts: 2207
Originally Posted By: Dragonscript
As an IT person i would NOT get a HP for several reason, and if you want them i can list them.


I would be interested in your reasons. Sue is still a "believer."

Old habits die hard.
_________________________
Doug Ritter
Editor
Equipped To Survive®
Chairman & Executive Director
Equipped To Survive Foundation
www.KnifeRights.org
www.DougRitter.com

Top
Page 1 of 2 1 2 >



Moderator:  Alan_Romania, Blast, chaosmagnet, cliff 
November
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
Who's Online
0 registered (), 446 Guests and 39 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
Aaron_Guinn, israfaceVity, Explorer9, GallenR, Jeebo
5370 Registered Users
Newest Posts
Satellite texting via iPhone, 911 via Pixel
by Ren
11/05/24 03:30 PM
Emergency Toilets for Obese People
by adam2
11/04/24 06:59 PM
For your Halloween enjoyment
by brandtb
10/31/24 01:29 PM
Chronic Wasting Disease, How are people dealing?
by clearwater
10/30/24 05:41 PM
Things I Have Learned About Generators
by roberttheiii
10/29/24 07:32 PM
Gift ideas for a fire station?
by brandtb
10/27/24 12:35 AM
The price of gold
by dougwalkabout
10/20/24 11:51 PM
Man rescued, floating on cooler
by Ren
10/16/24 02:39 PM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit
Glossary
Test

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.