Originally Posted By: JohnN

Agreed, although in our case, it is going to be a lot harder going than they might realize. 1 3/4" solid oak plus two reinforced deadbolts plus the latch (probably hard to hold the latch while they kick).

-john


That's something that I really need to upgrade to, some nice solid wood doors.

One thing that I haven't seen mentioned by anyone in this thread, is to not neglect the "hinge side" of the door. One of my neighbors' house was broken into recently, through the door at the side of their garage. The builders used a common pre-hung door, and when the burglar kicked it in, not only did the wood break out around the lock, but 2 of the hinges also sheared out of the door frame.
So, I guess it would be a great idea to pull out all those short screws that hold the hinges in the pre-fab door; and put in some long/heavy screws that will reach into the structural framing around the door.
Otherwise, if you've taken steps to reinforce the deadbolt/lock side of the door, it might literally "fly off the hinges" instead.