Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Page 3 of 6 < 1 2 3 4 5 6 >
Topic Options
#53533 - 11/14/05 06:20 PM Re: MagFire...
cedfire Offline
Addict

Registered: 07/10/03
Posts: 659
Loc: Orygun
Thanks for taking the time to review! Great info!

Top
#53534 - 11/14/05 08:15 PM Re: MagFire...
billvann Offline
Old Hand

Registered: 05/10/01
Posts: 780
Loc: NE Illinois, USA (42:19:08N 08...
Two comments to add:

1. The mag block seems easier for kids with small hands to hold.

2. I've found that the file from my Wave works best to produce shavings, or filings, in short order with minimal effort.
_________________________
Willie Vannerson
McHenry, IL

Top
#53535 - 11/14/05 08:46 PM Re: MagFire...
Marc Offline
Journeyman

Registered: 02/21/05
Posts: 78
My (uneducated) understanding is that Magnesium oxidizes extremely quick when exposed to air, and this is why making "pre-shavings" does not work, or so folks (far wise than I) say. I guess this why my mag-blocks all have a weird dull-film on them after not using them for a while which takes a couple of strikes to get off.

But Iron, you bring up a interesting point, if you can make the shavings quickly and then get them in an low oxygen environment, e.g. dunking them in petroleum jelly (is that a low oxygen environment?), is it possible to reduce the oxidation to the point where the mag shavings remain easy to spark? I am guessing the bigger the shavings the better, but I will defer to the chemistry types which I am sure are nearby. I was Googling around and I found references to "magnesium ribbons", which sound like a great
gift for the upcoming holidays, does anyone know anything about these things?

Marc

"Don't worry about people stealing an idea. If it's original, you will have to ram it down their throats."
-Howard Aiken




Top
#53536 - 11/14/05 11:44 PM Re: MagFire...
Anonymous
Unregistered


Quote:
I've never had any success getting paper to light from a spark
Ive found that the sparks from my firesteels are hot enough to burn through the paper where they land. If the paper is sitting in a good location it seems to light very quickly for me. With the papers Ive tried so far anyway.
Quote:
I don't think much of the magnesium as tinder, though. The wind blows the scrapings away, or I knock it when I am trying to scrap, or something.
This can be a problem with many tinders, I pick and choose what and how I use different tinders when I need them. Nearly every thing has draw backs, and you can learn to live with them. I like the extra heat that Magnessium gives, but it I mix it with something else, and keep it out of the wind. I'm not saying that I would use it to light every fire.

Top
#53537 - 11/15/05 12:19 AM Re: MagFire...
Anonymous
Unregistered


Quote:
Why bother with other stuff?
For starters Spark-Lites are hard to get down here. I've only had mine for 3 weeks. I have just found where I can get them, and even then they have to come from nearly 1500 km away.
It also doesnt hurt to have other types or items around, because you might find that some work better than others in different situations, and you might need some redundancy.

Top
#53538 - 11/15/05 12:39 AM Re: MagFire...
Anonymous
Unregistered


Quote:
magnesium ribbons
This would be the type of ribbon they use in chemistry lessons. I'm not sure how that would go, because the magnesium used in the tinder blocks is an alloy designed to burn longer but with the same heat. this makes it less explosive than straight magnesium.
I dont think the magnesium ribbon would work as well unless you slowed its burn time down.
It would be interesting to get some ribbon and try pouring wax (or similar) around it so you could have a magnesium wicked candle to try.

Top
#53539 - 11/15/05 01:05 AM Re: MagFire...
wildcard163 Offline


Registered: 09/04/05
Posts: 417
Loc: Illinois
Next time, put the magnesium shavings at the bottom of the pile... and for what it's worth, a good many years ago ( about 20), I burned a hole through an aluminum ash-tray AND a 3/4 inch coffee table (quite unintentionally) with a quarter sized pile of scrapings from a Doan bar... even though they are slow and laborious, they DO work.

Troy

P.S. By the way, the shavings were on TOP of the ash-tray and table, and burned DOWN through them... so much for hanging it on physics <img src="/images/graemlins/shocked.gif" alt="" /> <img src="/images/graemlins/wink.gif" alt="" /> <img src="/images/graemlins/grin.gif" alt="" />

Top
#53540 - 11/15/05 01:17 AM Re: MagFire...
wildcard163 Offline


Registered: 09/04/05
Posts: 417
Loc: Illinois
Why carry more than one knife? Why own more than one gun??? Give me redundancy AND variety!!! <img src="/images/graemlins/wink.gif" alt="" /> <img src="/images/graemlins/cool.gif" alt="" /> <img src="/images/graemlins/cool.gif" alt="" />

Troy

Top
#53541 - 11/15/05 01:27 AM Re: MagFire...
wildcard163 Offline


Registered: 09/04/05
Posts: 417
Loc: Illinois
BINGO, Bill... a file is great, the saw on the edge of the file on an original leatherman makes the shavings drop like snow in a snow-globe... try what you've got and use what works <img src="/images/graemlins/wink.gif" alt="" /> <img src="/images/graemlins/laugh.gif" alt="" /> <img src="/images/graemlins/grin.gif" alt="" />

Troy

Top
#53542 - 11/15/05 01:56 AM Re: MagFire...
wildcard163 Offline


Registered: 09/04/05
Posts: 417
Loc: Illinois
That sounds like a recipe to burn the p--- out of something... be careful with the experiment, and let us know how it goes.

Troy

Top
Page 3 of 6 < 1 2 3 4 5 6 >



Moderator:  Alan_Romania, Blast, cliff, Hikin_Jim 
March
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Who's Online
0 registered (), 324 Guests and 6 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
GallenR, Jeebo, NicholasMarshall, Yadav, BenFoakes
5367 Registered Users
Newest Posts
What did you do today to prepare?
by dougwalkabout
Yesterday at 11:21 PM
Zippo Butane Inserts
by dougwalkabout
Yesterday at 11:11 PM
Question about a "Backyard Mutitool"
by Ren
03/17/24 01:00 AM
Problem in my WhatsApp configuration
by Chisel
03/09/24 01:55 PM
New Madrid Seismic Zone
by Jeanette_Isabelle
03/04/24 02:44 PM
EDC Reduction
by EchoingLaugh
03/02/24 04:12 PM
Using a Compass Without a Map
by KenK
02/28/24 12:22 AM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit
Glossary
Test

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.