Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Page 1 of 2 1 2 >
Topic Options
#36047 - 01/03/05 11:01 PM hacksaw attachment to Leatherman charge?????
Anonymous
Unregistered


The main reason I purchased the Gerber 800 was the interchangable jig saw blade. I have used the legend for a year now and have started looking at the new leatherman Ti. I'm attracted to the Ti for it's size, weight, quality of construction over Gerber, 154cm blade, wood saw, much nicer diamond file, and the pocket clip. I don't want to give up my jig blade though.

That jig blade has gotten me out of a few situations where no other tool would do, other than a jig saw of course.

Here's the point of the post---I went to my favorite knife shop at the mall and took a good look at the Ti (homer simpson drool noise here). Would it be possible to attach a 3"-4" hacksaw blade to the Ti the same way the belt clip and lanyard are attached- on the end? One would just have to grind a little on a hack saw blade to copy the same attachment motif. Does anyone own a Ti and a hacksaw blade- could you please measure the width of the hacksaw blade to see if it is as wide as the attachment end of the lanyard or belt clip to see if this would be doable?

The cool thing about this, if it works, is that one could increase the usefullness of the tool without having to thrash the tool and void the warranty. Or, are hack saw blades manufactured if various widths other than the standard size for a hand saw.

Thanks!

Top
#36048 - 01/04/05 09:44 PM Re: hacksaw attachment to Leatherman charge?????
Paul810 Offline
Veteran

Registered: 03/02/03
Posts: 1428
Loc: NJ, USA
The hacksaw fits in the Ti's bit holder (loosly), however there is no way to hold it. It does look like you can drill a small hole in the center of the holder, put something in it (a small bolt maybe?) and use that to hold the blade. However, you arn't able to close the tool with the blade in there.

Top
#36049 - 01/05/05 04:18 PM hacksaw blade inserts where belt clip goes
Anonymous
Unregistered


Paul810, that is a good idea to put the hacksaw blade in the bit holder. I didn't consider that. I don't want to modify my Ti when I get it though.

What I was speaking of in my original post was to modify the end of the hacksaw blade to match the belt clip or lanyard end that fits the Ti and inserting the blade just as the belt clip would insert. The blade would not have to fold into the tool. Just insert, cut, release, store.

Is a hacksaw blade wide enough to have the groove and notch like the belt clip?

Top
#36050 - 01/05/05 04:43 PM Re: hacksaw blade inserts where belt clip goes
GoatRider Offline
Old Hand

Registered: 08/28/04
Posts: 835
Loc: Maple Grove, MN
I just pulled out a standard hack-saw blade from my shop, and laid the lanyard attachment on it. You'd be able to cut it down so that it fits, but it's not wide enough to make the little ears that would make it more stable. But there are wider hacksaw blades available that you could "repurpose", I'm already using one as the striker for a ferrocerium rod. I might just give it a try sometime, I'm pretty creative with a dremel. I'll take pictures if I make it work.
_________________________
- Benton

Top
#36051 - 01/07/05 10:46 PM Re: hacksaw blade inserts where belt clip goes
Paul810 Offline
Veteran

Registered: 03/02/03
Posts: 1428
Loc: NJ, USA
Whoops, sorry, I must have read too fast or something.

Top
#36052 - 01/08/05 02:38 AM Re: hacksaw blade inserts where belt clip goes
UTAlumnus Offline
Old Hand

Registered: 03/08/03
Posts: 1019
Loc: East Tennessee near Bristol
To get the width you might try a saw-z-all blade. These are wider and thicker than standard hacksaw blades and are made to work on the pull stroke.

Top
#36053 - 01/08/05 03:40 AM Re: hacksaw blade inserts where belt clip goes
GoatRider Offline
Old Hand

Registered: 08/28/04
Posts: 835
Loc: Maple Grove, MN
Yah whatever, I just looked around the saw blade section of Home Despot, and saw one that looked wider, and grabbed it.
_________________________
- Benton

Top
#36054 - 01/22/05 11:01 AM Re: hacksaw attachment to Leatherman charge?????
ulfhedinn Offline
Newbie

Registered: 12/29/04
Posts: 44
Loc: Europe
This idea about attaching a sawblade to the Charge is really great! I didn't have time to try it until today. After grinding(thanks Goatrider for the Dremel idea) down a sawblade from an electric hacksaw this was the result! <img src="/images/graemlins/smile.gif" alt="" />
Photobucket

What do you think ?


Edited by ulfhedinn (01/22/05 11:50 AM)

Top
#36055 - 01/22/05 02:09 PM Re: hacksaw attachment to Leatherman charge?????
GoatRider Offline
Old Hand

Registered: 08/28/04
Posts: 835
Loc: Maple Grove, MN
Looks great! How's it work? Does it hold firmly enough to be able to saw with it?
_________________________
- Benton

Top
#36056 - 01/22/05 03:00 PM Re: hacksaw attachment to Leatherman charge?????
ulfhedinn Offline
Newbie

Registered: 12/29/04
Posts: 44
Loc: Europe
It works just great. I must say I worked very slowly. With a feltpen I marked the outline of the lanyard ring and then cut out the shape as accurately as possible. I frequently checked if the new tool allready fitted. Now it snaps in place quit fermly. I managed to cut an ash log of about two inches without any problems. The teeth of this saw are a bit small and slow. But as a general idea it's perfect. Why didn't Leatherman think of this? <img src="/images/graemlins/wink.gif" alt="" />
If I have some time I will search for other kinds of sawblades:
hacksaw blades for cutting metal, maybe tungsten carbide for cutting very hard stuff like glas. The sawblades don't take a lot of space in the leather sheath, that's what is nice about this idea!

Top
Page 1 of 2 1 2 >



Moderator:  Alan_Romania, Blast, cliff, Hikin_Jim 
March
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Who's Online
0 registered (), 324 Guests and 6 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
GallenR, Jeebo, NicholasMarshall, Yadav, BenFoakes
5367 Registered Users
Newest Posts
What did you do today to prepare?
by dougwalkabout
Yesterday at 11:21 PM
Zippo Butane Inserts
by dougwalkabout
Yesterday at 11:11 PM
Question about a "Backyard Mutitool"
by Ren
03/17/24 01:00 AM
Problem in my WhatsApp configuration
by Chisel
03/09/24 01:55 PM
New Madrid Seismic Zone
by Jeanette_Isabelle
03/04/24 02:44 PM
EDC Reduction
by EchoingLaugh
03/02/24 04:12 PM
Using a Compass Without a Map
by KenK
02/28/24 12:22 AM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit
Glossary
Test

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.