Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Page 1 of 3 1 2 3 >
Topic Options
#25279 - 03/02/04 02:51 AM New Leathermans: Good Products or Quick Profits?
Anonymous
Unregistered


I think the whole deal with revamping the Leatherman line is ridiculous. Gone are the days of yore when someone could recieve a brand new multi tool and be ecstatic. Now I think the Leatherman Company has abandoned their original mission for quick profits. I am always in favor of new advances, but this is unnecessary. In this world of change, there seemed to be one constant: a good Leatherman. In my opinion, the Juice and Squirt lent to the downfall of Leatherman Company. The new, flashy models that are being introduced as a replacement for the Wave are just eye candy. And those sheaths look like fecal matter. I think the yielders of the "older" or "classic" line of Leatherman tools are now comparable to the Last of the Mohicans. We are a dying race and I believe we should unify to boycott the new line of these over-commercialized playthings. I can already picture someone asking me to use my Leatherman Wave and then becoming disgusted when it is not the "Charge" in fashionable Titanium. Faithful "classic" Leatherman owners will not fade away into the night. We will stand tall and keep these new toys from taking over the block. Stop letting the people in suits make the decisions and let the real users decide! I'm really dissapointed with this new line, I can't believe Leatherman is doing this...

Top
#25280 - 03/02/04 05:06 AM Re: New Leathermans: Good Products or Quick Profits?
Paul810 Offline
Veteran

Registered: 03/02/03
Posts: 1428
Loc: NJ, USA
The Juice line was never the replacement for the wave, they are designed to get people who normally wouldn't carry anything bigger then a small SAK into the multi-tool world. I do like some of the juice line, they are a great alternative to SAKs, I have given a few of them as gifts to people who normally wouldn't carry a flashlight and have found them having a home in their pockets and purses. The new line that is replacing the classics is fine. The wave is pretty much the same, but with beef-ier jaws and locking tools, I don't see anything wrong there, the charges look fine to me, they have the size of the super tool 200 with the weight of the wave and have locking tools. Titanium is great, in this aplication it is better then steel. The Kick, Fuse, and Blast are the same as before, just with better handles and an easier hex adapter. If you really feel that bad you still have the crunch and Supertool 200, both great and will probibly stay the way they are for a while. From a guy who has every leatherman in the classic line except the mini-tool and PST II I think the new changes are good.

Top
#25281 - 03/02/04 02:24 PM Re: New Leathermans: Good Products or Quick Profits?
Eugene Offline
Carpal Tunnel

Registered: 12/26/02
Posts: 2995
I kind of see Leathermans point. As knives and other tools become more and more "evil" to the rest of the world they have to find ways to exapnd their market. Making a few cute tools to hopefully sell to poeple and keep their company our of bankrupcy is a good thing as long as they don't abandon the poeple who want real tools. I personally will never buy a tool with a corkscrew because I could care less if someone can't get to their wine (I feel safer if they can't anyway, one less person driving on the road with me after they have had some wine and most social drinkers hold their wine less well that the full fledged alcoholic.)

Paul, you may wish to check on that hex adapter, itlooks to my from the specs to not be hex at all, rather the flattened hex the wave uses, that is my biggest complaint with the new design, I want standard hex.

Some of the new tools I like, If I could have my wave made of a lighter material but still as strong I would buy one, but I'm not willing to give up my finctional screwdrivers for the one in the new wave, the old wave has a functional screwdriver without carryuing the tool adapter then with the too,adapter I can have an unlimited type of screwdrivers. With the new wave I have to carry their special bits with me at all times.

I've been wanting to e-mail leatherman for a while with some new product suggestions. I want to see a recheting screwdriver added to the existing tool adapter. I have added a 1/4" hex to square adapter to mine before and user a hex socket with the adapter set at 90 degrees before when I regular screwdriver couldn't fit and I didn't have a real rachet (those little computer repair kits come with a screwdriver and bits and sockets). I also want to see a larger PST sized tool with wave handles, or even a crunch with wave handles, something big enough for the heavy duty jobs such as changing a fan belt or tightening a loose oil drain plug, something where the smaller size of the wave you just can't get enough leverage.

Top
#25282 - 03/02/04 02:54 PM Re: New Leathermans: Good Products or Quick Profits?
dBu24 Offline
new member

Registered: 09/26/02
Posts: 81
Loc: IL
I'll stick to the Victorinox multitools- they redesigned those handles so now it seems to be THE all time winner,while keeping the looks and quality of a real tough tool

I will still keep my "classic" Swisstool, though. Hmmm , now that I think about it, I purchased it at the Zurich airport while in transit to the US.... 3 years ago. funny,eh?

Top
#25283 - 03/02/04 03:37 PM Re: New Leathermans: Good Products or Quick Profits?
Stokie Offline
Member

Registered: 02/05/04
Posts: 175
Loc: Paris, France
Eugene

You make some good points. I've an old Super Tool with tool adapter. On site this has helped me out loads of times plus I carry an assortment of hex bits for security screws, triwing, snake eyes, Torx etc. I can't see Leatherman providing these anytime soon.

The one wish I have is that the tool adapter had a ratchet action. Maybe if enough mention this then eventually they may get the hint.

Top
#25284 - 03/02/04 04:35 PM Re: New Leathermans: Good Products or Quick Profits?
David Offline
Enthusiast

Registered: 10/09/02
Posts: 245
Loc: Tennessee (middle)
Eugene & Stokie--

Contact Leatherman directly with your comments & suggestions. They've been quite receptive when I've done so, and appreciative of the interest in their products. It seems they really do like to hear from their customers.

Nothing wrong with discussing it here, but if you want Leatherman to know, tell them!

I haven't had time even to look at pictures of the new lines, so I guess I've got some reading to do...

David

Top
#25285 - 03/02/04 05:00 PM Re: New Leathermans: Good Products or Quick Profits?
Eugene Offline
Carpal Tunnel

Registered: 12/26/02
Posts: 2995
I've went so far as to buy a couple different screwdrivers from Sears or Lowes or Home Depot but haven't found anything that will work just right. Most racheting 1/4" hex bit screwdrivers just have too long of a shaft to work as a rachet when the tool adapter if turned to the 90degree angle. I'm thinking something like this http://www.sears.com/sr/javasr/product.d...pid=00904116000 might work out well. Cut off the hanfle and weld it to the tool adapter and send leatherman a pic.

Top
#25286 - 03/02/04 07:19 PM Re: New Leathermans: Good Products or Quick Profits?
Anonymous
Unregistered


Eaglescout,

I would like to begin by saying that I don't chime in much around here. Mostly I defer to those more knowledgeable than I. Like many, I am here to learn. I reserve my posts for something that I feel I can offer a unique opinion on.

You brought up some interesting points. And while I agree that the new leathermans are a bit out of the norm from what I've come to expect form leatherman, their still a leatherman. What I've come to expect from leatherman: quality. I don't think that they make "fecal matter" at all. I have come to love this company and trust in their craftsmanship.

I agree with you that the Squirt and Juice models are out of thier norm, and I personally don't use either. (I should note that I do own a Juice) I may not EDC them, but they are nonetheless good products and do fit the need a large populus. Like the claws on a hammer, just becuse you're not using them doesn't mean they aren't handy.

In conclusion, I haven't actually laid my hands on these new models. (has anyone?) But from the reviews I've read it seems that Leatherman has raised the bar again. I look forward to even higher quality and ruggedness from Leatherman.

I should also note that my main EDC knife is a Benchmade Osborne 940 with the 154CM Steel. I can vouch for the edge retention and rugged durability from experience. I welcome this improvement from Leatherman.

--Luke


Top
#25287 - 03/02/04 07:48 PM Re: New Leathermans: Good Products or Quick Profits?
Paul810 Offline
Veteran

Registered: 03/02/03
Posts: 1428
Loc: NJ, USA
"Paul, you may wish to check on that hex adapter, itlooks to my from the specs to not be hex at all, rather the flattened hex the wave uses, that is my biggest complaint with the new design, I want standard hex."

As par Mr. Ritter:

"A bit holder that slips over the end of the Phillips screwdriver (al la Gerber) and which accepts both Leatherman’s unique flattened hex bits as well as standard 1/4-inch hex bits is an available accessory that fits all three models. The basic set includes the bit holder and five double-ended bits in a carrier ($20). The molded carrier even has storage slots for two standard bits"

So, the kick/blast/fuse models can use both the flat and regular hex in their phillips adapter.

Top
#25288 - 03/02/04 07:48 PM Re: New Leathermans: Good Products or Quick Profits?
Polak187 Offline
Veteran

Registered: 05/23/02
Posts: 1403
Loc: Brooklyn, New York
Tool is a tool. How many freaking car wrenches do you need to buy? Unless you break it you very rarely need a new one. Now I’ve been told and it may be not true that a lot of home appliances like toasters, washing machines in 50s and 60s were build like tanks. I mean you had your toaster for 20 years or so and that thing still work like new. Companies realized that by making good product they may get recommendations but they will not get repeat customers since their stuff is not breaking. So they started using cheaper parts making equipment more prone to break in order to have people going out to buy replacements.

Now if by any chance above is true we may experience similar with Leatherman. I use wave since 99. And if it wasn’t for the fact that my original one was stolen in Africa I would have never bought a second one. I’m not planning to buy another tool unless I break this one. I think that Multi tool market is saturated with quality products. It’s time to start making things that are prone to defects so people go out and buy replacements, or more parts… Also a lot of people but muli tools because they are hip and look cool not because they are functional. Ex. My friend calls me up to borrow a saw. I say no problem I drop it off on the way to work. I bring it over and ask what sort of construction project he has. He said he needs to cut few sticks for his wife garden. I asked what’s wrong with his Leatherman. He didn’t even know that Leatherman that sits in his desk had a saw.

To support my theory a bit. I remember when Gerber tools pliers were secured in place using hex screws which made tools fully user serviceable. Now rivets are used for that purpose. If your tool breaks and you are in the hurry so you can’t send it to Gerber for repair I guess you have to go out and buy a new one.

Matt
_________________________
Matt
http://brunerdog.tripod.com/survival/index.html

Top
Page 1 of 3 1 2 3 >



Moderator:  Alan_Romania, Blast, cliff, Hikin_Jim 
March
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Who's Online
2 registered (NAro, Ren), 444 Guests and 27 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
GallenR, Jeebo, NicholasMarshall, Yadav, BenFoakes
5367 Registered Users
Newest Posts
What did you do today to prepare?
by dougwalkabout
03/27/24 11:21 PM
Zippo Butane Inserts
by dougwalkabout
03/27/24 11:11 PM
Question about a "Backyard Mutitool"
by Ren
03/17/24 01:00 AM
Problem in my WhatsApp configuration
by Chisel
03/09/24 01:55 PM
New Madrid Seismic Zone
by Jeanette_Isabelle
03/04/24 02:44 PM
EDC Reduction
by EchoingLaugh
03/02/24 04:12 PM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit
Glossary
Test

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.