Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Page 1 of 2 1 2 >
Topic Options
#188668 - 11/19/09 09:42 PM wick for a pill fob lighter (edc)
freeballer Offline
Journeyman

Registered: 08/25/06
Posts: 60
Loc: nb, Canada
I have a pill fob lighter I got online a year or two ago. Everything is working great on it and I love the small size. However it does have a drawback; I can't find an adequate whick for it! I went to 3 cigarette shops/head shops and most haven't even SEEN one like this one.

If anybody recognizes where they are sold I can find the manufacturer, or if anybody know where I can find or order that type of whick.

I hope the pics included shows enough detail and approximate size


Attachments
IMG_0293.jpg

IMG_0297.jpg



Top
#188677 - 11/19/09 11:05 PM Re: wick for a pill fob lighter (edc) [Re: freeballer]
dougwalkabout Offline
Crazy Canuck
Carpal Tunnel

Registered: 02/03/07
Posts: 2594
Loc: Alberta, Canada
Cool lighter. I haven't seen anything like it.

The closest I have is a replica brass WW1 trench lighter.

Seems like the wick is really thin. How does it compare to the wicks sold for Zippos or some of those miniature kerosene lamps?

Top
#188680 - 11/19/09 11:19 PM Re: wick for a pill fob lighter (edc) [Re: dougwalkabout]
Art_in_FL Offline
Pooh-Bah

Registered: 09/01/07
Posts: 2432
You might keep looking and find what you want. I suspect that an old-time tobacconist shop is your best bet. Find a place that deals with Zippo lighters and handles the wicks if you can buy Zippo wicks you can tease them apart and recombine them to create the wick configuration you need.

Many places that sell oil lamps have wicking that could be reworked to get what you need.

I keep a roll of all-cotton twine around and as-is it makes a good wick for a lot of quick and dirty applications. a metal jar cap, fat or oil, and a short length of all-cotton cord and you have a lamp. I have also braided it, or teased it apart and braided/plaited the smaller components, to make larger ones.


Top
#188692 - 11/20/09 12:38 AM Re: wick for a pill fob lighter (edc) [Re: Art_in_FL]
ducktapeguy Offline
Enthusiast

Registered: 03/28/06
Posts: 358
Looks like a peanut lighter from county comm or one of the many knock-offs

http://www.countycomm.com/peanutlighter.htm

http://www.dealextreme.com/forums/Forums.dx/Forum.3734~threadid.195701

For the price, it's probably just easier to buy the whole lighter, the wick is a pain to try and feed through

Top
#188703 - 11/20/09 02:54 AM Re: wick for a pill fob lighter (edc) [Re: ducktapeguy]
Sparky83 Offline
Stranger

Registered: 11/15/09
Posts: 1
You might take a look at The Wick Store (www.wickstore.com). If you click on the "Wick 10 Yard Hanks" button, they have a "10 Yards Round Cotton Oil Lamp Wick - 1/8" Diameter" for $10.80 that might do the trick. (I suspect that 10 yards is probably enough wick for 10 lifetimes, but you can pass it on to your descendents ;>)

Top
#188709 - 11/20/09 04:49 AM Re: wick for a pill fob lighter (edc) [Re: Sparky83]
freeballer Offline
Journeyman

Registered: 08/25/06
Posts: 60
Loc: nb, Canada
thanks. I did get this from a "survival equipment" website, but the name/address escapes me. I've been to two cigar shops, and yes the wick is quite a bit larger on a zippo (give or take 2x).

I assume if I wound the wick tight enough it shouldn't make it less likely to take a flame?

Wow. I thought MY lighter was small. That peanut is SUPER small!

the 1/8" looks to be right, I saw a comparison pic of that, a larger (which should be for zippo) and it looks right. I should look into that one but you're right the 10yards would last a long time!

do you all know if its typically cotton wicks? there is fiberglass AND cotton. To me it feels like cotton perhaps but I'm far from an expert.


Edited by freeballer (11/20/09 04:49 AM)

Top
#188759 - 11/20/09 06:25 PM Re: wick for a pill fob lighter (edc) [Re: freeballer]
Tyber Offline
Sheriff
Enthusiast

Registered: 04/27/09
Posts: 292
Loc: ST. Paul MN
I would say that you could modify a zippo wick to work

Top
#188771 - 11/20/09 08:42 PM Re: wick for a pill fob lighter (edc) [Re: freeballer]
falcon5000 Offline
Addict

Registered: 09/08/05
Posts: 662
If it's a standard peanut lighter or country comm lighter then all the zippo parts at walmart, cvs or Walgreens will work in these lighters. I have changed out the flint and wicks in all these lighters, you have to use sand paper to sand the diameter of the flint down to work and the wicks have to be rolled tight and a good pair of hemostats will pull it through with no problem. I have found that zippo parts work the best than the stuff it came with it. I EDC the peanut lighters and have them all in all of my kits and keep a small FOB of lighter fluid with them. They work great and waterproof. Just got to protect them from wind when lighting but it beats butane for me, I'm not a butane fan at all. I can also use the lighter fluid as tinder with my flint as well.







_________________________
Failure is not an option!
USMC Jungle Environmental Survival Training PI 1985

Top
#188778 - 11/20/09 09:48 PM Re: wick for a pill fob lighter (edc) [Re: falcon5000]
nurit Offline
Member

Registered: 03/27/08
Posts: 191
Loc: NYC
Great information and photos, falcon5000. Thanks very much.

I have some peanut lighters, and the even smaller "split pea" lighters, from countycomm. As you said, the standard flints are too big in diameter. I tried first a Zippo and then a Ronson flint, grinding them down with a metal file, but couldn't make them small enough to fit. Never thought of using sandpaper!

Top
#188809 - 11/21/09 04:39 AM Re: wick for a pill fob lighter (edc) [Re: nurit]
Art_in_FL Offline
Pooh-Bah

Registered: 09/01/07
Posts: 2432
Wicks, bought or DIY, are easy to feed into most lighters. They have to be a bit tight to work right. I usually tie a bit of thread or dental floss very tightly very close to one end, stuff the thread up through the hole and then use it to pull the wick in, trim the thread off and fluff out a bit.

Making a wick from cotton string is simple once you know how thick you need it. You could probably get by just twisting up the cotton string. I plaited the few I made. Once you get the rhythm down it is about as easy to braid or plait up three feet of wick as it is to just produce the three inches you need. The only reason I needed to do it twice was because I couldn't find the remainder of the first go. Plaiting, depending on how tight you do it, can make a nice tight wick that pulls naphtha well, burns slowly and evenly, and produces a nice flame.

It isn't rocket science. It's screwing around with a ball of cotton string. Look up plaiting and braiding on the web and get yourself some string. Making your own light line is a useful skill that allows you to make your own string, light line, and rope. Also wicks for oil or fat lamps ... and a new wick for that oddball lighter.

Top
Page 1 of 2 1 2 >



Moderator:  Alan_Romania, Blast, cliff, Hikin_Jim 
December
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Who's Online
0 registered (), 236 Guests and 7 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
tangelo, woodstix, Jethro, qwikjoeysmall, Cowherd35
5230 Registered Users
Newest Posts
wazoo belt alternative
by chaosmagnet
Today at 01:59 PM
Big Amazon Sale on Morakniv - this evening only
by Phaedrus
Today at 06:27 AM
Baking soda and super glue epoxy
by M_a_x
Yesterday at 01:43 PM
What did you do today to prepare?
by hikermor
Yesterday at 01:24 AM
get a cheap laptop
by CANOEDOGS
Yesterday at 01:10 AM
building in a fire zone
by hikermor
12/16/17 04:56 PM
rug could buy time between rattlesnake bite, anti
by qwikjoeysmall
12/16/17 02:55 PM
Happy Hanukkah
by Jeanette_Isabelle
12/16/17 02:52 PM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit
Glossary
Test

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.