Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Page 2 of 3 < 1 2 3 >
Topic Options
#170225 - 03/27/09 03:46 PM Re: My survival knife [Re: Loganenator]
tomfaranda Offline
Enthusiast

Registered: 02/14/08
Posts: 301
Loc: Croton on Hudson, NY
Looks very practical. Somewhat similar to the buck vanguard.

There's only one vendor for the knife on ebay - $63.75 and free shipping.

Can't find it on amazon.

Top
#170227 - 03/27/09 05:16 PM Re: My survival knife [Re: tomfaranda]
haertig Offline
Pooh-Bah

Registered: 03/13/05
Posts: 2322
Loc: Colorado
Originally Posted By: tomfaranda
There's only one vendor for the knife on ebay - $63.75 and free shipping.

I'd buy it from the New Graham store and not take my chances using eBay. New Graham is a great place to buy from. Only $56.25 for this knife.

http://newgraham.com/store/product/4654/Pardue-Rant-MDP-BM10502/

After seeing this thread, I may have to go out and buy me one of these things. Not like I really need another knife. But this one looks well designed, very useful size, and it is nice to look at too!

Top
#170228 - 03/27/09 05:29 PM Re: My survival knife [Re: haertig]
Tom_L Offline
Addict

Registered: 03/19/07
Posts: 690
Heck yeah, looks like a lot of knife for the buck. Sexier IMHO than Fallkniven and a whole lot more cost-effective. wink

Top
#170232 - 03/27/09 06:16 PM Re: My survival knife [Re: Tom_L]
KenK Offline
"Be Prepared"
Pooh-Bah

Registered: 06/26/04
Posts: 2208
Loc: NE Wisconsin
Another knife that Doug recommends for a low-cost alternative, is the Gerber Big Rock.

As I recall, he also pointed out that the owner would get very familiar with sharpening the blade since he'd have to do it a lot ... in comparison to the S30V steel on his blades.

I wish the blades on the Rant and Fixed Griptilian (not Doug's Mk3) didn't have the spine angled near the tip. I know its for better insertion (stab, stab), but I'd rather have it flat for batoning (not that I baton - I use an axe for that).

The Rant blade seems a bit thick (0.175) for my taste. The Fixed Grip is a bit thin (0.119"). I like Doug's MK3 thickness of 0.14. I suspect I'd prefer the Fixed Grip's thinner blade versus the Rant's thicker blade.

Big difference in weight too - Rant=11.8 oz, Fixed Grip=4.6 oz. Doug's Mk3=5.7 oz.

The Big Rock knife is 6.3 oz. and has a 0.16" thick blade.

In general I don't buy the whole "survival knife" thing. When things go wrong and I find myself at nature's mercy, the knife I'm carrying will be my "survival knife". 99.9% of the time I carry Doug's Mk1 mini. It will do whatever I need it to do - so long as I don't try to pry open steel doors or shatter concrete with it.

Ken

Top
#170236 - 03/27/09 07:02 PM Re: My survival knife [Re: borninwild]
raptor Offline
Enthusiast

Registered: 04/05/08
Posts: 288
Loc: Europe
Very nice knife. It looks great. Although, like Ken pointed out, itīs a pity that it possesses the false edge.

Top
#170237 - 03/27/09 07:38 PM Re: My survival knife [Re: Tom_L]
Leigh_Ratcliffe Offline
Veteran

Registered: 03/31/06
Posts: 1355
Loc: United Kingdom.
Originally Posted By: Tom_L
Heck yeah, looks like a lot of knife for the buck. Sexier IMHO than Fallkniven and a whole lot more cost-effective. wink



I have both a Fallkniven and a Benchmade and I'm not entirely sure that the comparison is fair.

The F1 is designed for North European conditions. It's one of the toughest production knives ever made. It's also somewhat smaller than the Benchmade. When asked for advise I always recommend Fallkniven. If it's within the asker's means.

Having said that: I also recommend the the Benchmade to people who are on a tighter budget. It's 44oC steel, which under most circumstances I would personally considerer a no-no steel. But, this is Benchmade 440c tempered. Sharpens easily and keeps an edge. Its full tang (I checked with Benchmade) and has a decent low slip handle.

And I would stay away from Gerber. Their steel is a PTA bad joke to sharpen.
_________________________
I don't do dumb & helpless.

Top
#170250 - 03/28/09 12:55 AM Re: My survival knife [Re: Leigh_Ratcliffe]
lifeview Offline
Journeyman

Registered: 05/09/06
Posts: 80
Loc: Nashville,TN USA
+1 with Leigh's comments.
_________________________
Mike
LifeView Outdoors

Top
#170255 - 03/28/09 10:37 AM Re: My survival knife [Re: lifeview]
KenK Offline
"Be Prepared"
Pooh-Bah

Registered: 06/26/04
Posts: 2208
Loc: NE Wisconsin
What are "Northern European conditions"?

Top
#170257 - 03/28/09 11:31 AM Re: My survival knife [Re: KenK]
Leigh_Ratcliffe Offline
Veteran

Registered: 03/31/06
Posts: 1355
Loc: United Kingdom.
Originally Posted By: KenK
What are "Northern European conditions"?


Cold, wet, windy. -20 to + 5 celcius. Open tundra to pine forest. Think Tutenborge Forest in Germany.

440C steel has a rep for going brittle at low temperatures. Which is why I personally think that a Fallkniven VG-10 laminated blade is the better choice.
_________________________
I don't do dumb & helpless.

Top
#170259 - 03/28/09 01:03 PM Re: My survival knife [Re: Leigh_Ratcliffe]
Tom_L Offline
Addict

Registered: 03/19/07
Posts: 690
Quote:
Cold, wet, windy. -20 to + 5 celcius. Open tundra to pine forest. Think Tutenborge Forest in Germany.


You mean the Teutoburg forest (historical battlefield where Arminius destroyed the Roman legions)? I'm not sure that's a good comparison to Scandinavia. Also, tundra has very little in common with boreal forest.

Anyway, I live in the temperate zone but the temperature range you've just described is typical for our winter. I've never seen anything that would indicate 440C is any more brittle at low temperatures than any other stainless steel.

I'm sure the Fallkniven F1 would be a good choice for the Northern European environment or any other place with a cold climate and lots of forest. So would a Mora (at a fraction of the price), the fixed-blade Benchmade or even a Kabar if you need something closer to a tough sharpened prybar that still makes a good knife.

IME, if there is one truly indispensable survival tool in the North European (or equivalent) environment it's a good axe. Probably even more important than the knife. No matter what kind of knife you have you need an axe to make a decent shelter, fell trees and split logs in the cold, snowy coniferous forest zone. Without that capability your chances of survival drop rapidly.

Top
Page 2 of 3 < 1 2 3 >



Moderator:  Alan_Romania, Blast, cliff, Hikin_Jim 
March
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Who's Online
0 registered (), 325 Guests and 52 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
GallenR, Jeebo, NicholasMarshall, Yadav, BenFoakes
5367 Registered Users
Newest Posts
What did you do today to prepare?
by dougwalkabout
Yesterday at 11:21 PM
Zippo Butane Inserts
by dougwalkabout
Yesterday at 11:11 PM
Question about a "Backyard Mutitool"
by Ren
03/17/24 01:00 AM
Problem in my WhatsApp configuration
by Chisel
03/09/24 01:55 PM
New Madrid Seismic Zone
by Jeanette_Isabelle
03/04/24 02:44 PM
EDC Reduction
by EchoingLaugh
03/02/24 04:12 PM
Using a Compass Without a Map
by KenK
02/28/24 12:22 AM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit
Glossary
Test

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.