Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Page 1 of 2 1 2 >
Topic Options
#151639 - 10/11/08 04:22 PM Checking home electrical wiring
Arney Offline

Registered: 09/15/05
Posts: 2485
Loc: California
I've just been reading about electrical fires in homes recently because of this emergency preparedness course I have been attending lately. I guess I've always been most concerned about cooking-related fires and not given much thought to electrical fires at home.

Since prevention is always better than reaction, I got to thinking about my mother's home. It's quite old, built in the 30's, and probably was not designed to provide the power that modern living demands. I'm particularly thinking about the wiring throughout the house (the fixed wiring, not things like extension cords).

In my reading, I see these comments suggesting that an electrician can check your home wiring, but I'm wondering, how can an electrician check the status of wires behind all the walls? If my mom has slowly been overloading a particular circuit and the insulation is slowly melting away inside the wall somewhere, is that actually something that an electrician would be able to find? Or is an electrician going to just focus mostly on checking the outlets and breaker box and that's mostly it?

I'm just really curious and I'd like to know what I can and can't expect from an electrician. And since reading more on the subject, I'm realizing that I should really be more aware of the danger of electrical fires since it's right up there as far as emergencies that I'm statistically likely to face at home, and most dangerous is the fact that most of these electrical fires happen when we're all sleeping.

Actually, I remember reading an article a few years ago about how universities are having to spend a lot of money upgrading the electrical systems in their dorms because today's students bring so many power-hungry appliances with them. When I was a freshman, having a PC was still very rare, and barely any of us had TV's, let alone these giant, power-hungry flat screens that we have today. A little dorm fridge and a boombox was about it in my room.

Just think about something as simple as charging a cell phone, which none of us had not that long ago. Charging one draws, what? Maybe 300-500 mA? Multiply that by every single student in the dorm and that's a lot of juice if everyone is charging their phone every night.

#151659 - 10/11/08 10:21 PM Re: Checking home electrical wiring [Re: Arney]
haertig Offline

Registered: 03/13/05
Posts: 2203
Loc: Colorado
Originally Posted By: Arney
I'd like to know what I can and can't expect from an electrician.

Just call an electrician and ask! Older homes may have different materials used for the wiring that are no longer considered appropriate. I think they used to use aluminum, but an electrician can come out and pig-tail the outlet boxes and switch boxes to take care of that. I think that's what they call it, "pig-tail". Call an electrician and ask what they do during an inspection. I'm sure they'll answer that simple question over the phone for free. If they won't, find a different electrician.

#151665 - 10/11/08 11:15 PM Re: Checking home electrical wiring [Re: Arney]
ironraven Offline
Cranky Geek
Carpal Tunnel

Registered: 09/08/05
Posts: 4642
Loc: Vermont
The big question would be when was the wiring done.

Not sure when them moved away from fabric covered wire, but it would have been a while. But aluminum wires enjoyed populatiry (and infamy) in the 70s and maybe 80s- if there was wiring done during that time, I'm not sure if they can use resistance or any sensory based methods to tell, but IMO it would be worth it bust to sheet rock and find out.

As for telling if insulation is warn, as far as I know not really able to tell except MAYBE thermal sensing.

When a man dare not speak without malice for fear of giving insult, that is when truth starts to die. Truth is the truest freedom.

#151667 - 10/12/08 12:33 AM Re: Checking home electrical wiring [Re: ironraven]
KenK Offline
"Be Prepared"

Registered: 06/26/04
Posts: 2132
Loc: NE Wisconsin
Electricians can look for inferior materials and techniques by checking the fuse box or circuit breaker box, and by sampling some outlets and switchs. They can do circuit audits to make sure that circuits are not overloaded relative to the breakers in the breaker box.

They can check wiring for power leaking to the ground or neutral lines, crossed ground & neutral lines, and excessive resistance in circuits. Actually there are pretty inexpensive circuit checkers that can do some of that for you - you just plug them into an outlet and read the lights.

I'm by no means an expert, but having run power to - and installed the conduit, circuit breaker box, ground, and wiring for my horse barn taught me a lot about the topic, and helped me gain a very healthy respect for what electricians need to know. I know only a fraction of what a good electrcian knows.

#151674 - 10/12/08 01:47 AM Re: Checking home electrical wiring [Re: ironraven]
Art_in_FL Offline

Registered: 09/01/07
Posts: 2432
The good news is that most problems have to do with the initial installation and adequacy for current loads. Over time people tend to use more power in different locations. Which leads to overloaded circuits and the use of extension cords as a substitute for a proper installation. Both of these situations lead to problems and they account for many fires.

Barring this sort of thing the vast majority of acute problems in any electrical system will be where connections are made, junction boxes and panels; where wiring is exposed to wear and tear, receptacles and extension cords; and where it is mechanically damaged.

These sorts of issues are easily spotted by a diligent inspection by a well train and experienced electrician by inspecting the wiring that is accessible.

A careful visual and electrical check of the panels, opening a representative sample of outlets and switches, and a quick visual inspection of any exposed wiring in attic and crawl spaces can go a long way to determining the health of an electrical system.

#151708 - 10/12/08 06:50 PM Re: Checking home electrical wiring [Re: Art_in_FL]
CJK Offline

Registered: 08/14/05
Posts: 586
Loc: FL, USA
I'm no expert either....
Yes there is something known as pigtailing......but IIRC it refers to 'multiple wires' being 'twisted together' with one wire so that that wire can lead to the (outlet/socket/fixture/switch). It is done so that there is only "one" wire connected to the item. IIRC there is a limit as to how many wires can be twisted together with the one wire....

Now about the aluminum wiring.....from what I've read and been told by several electricians......DON'T PLAY AROUND WITH IT!!!!

They've told me things that (unfortunatley) I can't remember the details of....but I remember that I decided I won't touch it. Now I am NOT an electrician but have worked on may electrical projects and a number of them were on 220 lines...and I remember that what they told me basically led me to think that I didn't want to deal with the stuff.....if anyone knows more or better than I then PLEASE say so.......I'm interested too....

#151709 - 10/12/08 06:56 PM Re: Checking home electrical wiring [Re: Art_in_FL]
HerbG Offline

Registered: 02/12/07
Posts: 142
In the past few years, I have had several friends who were faced with completely rewiring their homes or having their homeowner's insurance canceled. According to them, homes built before a certain date were being arbitrarily selected by their insurance companies which notified the owner that their coverage would be terminated unless the home was brought up to current code. I suppose this is another incentive to update home electrical circuits.

#151726 - 10/12/08 09:46 PM Re: Checking home electrical wiring [Re: Arney]
Arney Offline

Registered: 09/15/05
Posts: 2485
Loc: California
Thanks for the replies so far. Been doing some more research. For the rather technically-oriented reader, I ran across an interesting report called How Do Electrical Wiring Faults Lead to Structure Ignitions. It's a compilation of research on the topic, which according to the authors, is actually very thin for such an important topic. Most of the research is only happening in Japan.

#151739 - 10/13/08 12:01 AM Re: Checking home electrical wiring [Re: Arney]
Mike_in_NKY Offline

Registered: 05/22/07
Posts: 121
Loc: KY
I too am not an electrician but have done some electrical work. Older homes can have an electrical service panel that is too small (amperage) for the needs of the home. Now that A/C, microwaves, dishwashers, clothes dryers, jacuzzi s/hot tubs are common, higher amperage service panels/and panel feeds are necessary. In some areas new homes have 200 Amp services whereas 50 or a 100 Amp service was common in older homes.

GFCI outlets/breakers are common in wet areas and ARC FAULT circuits for bedrooms are common in newer homes. Whole panel surge protectors are also common now. Very old homes had Knob and Tube wiring (no ground). Some homes had Aluminum wiring (very important to replace a fixture (outlet/switch) with ones rated for aluminum wire if that's what you have installed.

+1 on getting a trusted electrician to inspect your Mom's home for wiring issues. If any are identified, best to get a couple of estimates/opinions to ensure that what is being suggested is necessary.

#151748 - 10/13/08 02:21 AM Re: Checking home electrical wiring [Re: Mike_in_NKY]
Tarzan Offline

Registered: 02/02/08
Posts: 146
Loc: Washington
We had a guy come to the factory I was working in with an IR camera. He made a video of the entire plant, all the machinery and the electrical panels.
The beautiful thing about this is it showed all the hotspots which the maintenance guy could repair. This really wasn't that expensive and it provides a great deal of peace of mind.
I think you could probably get a reduction in your homeowners as well, if you talked to the agent and sent them a DVD of the inspection.

Page 1 of 2 1 2 >

Moderator:  Alan_Romania, Blast, cliff, Hikin_Jim 
Su M Tu W Th F Sa
1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31
Who's Online
1 registered (Doug_Ritter), 257 Guests and 4 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
KennethCopeland, manimal, tsfirstaid, Sherette, ohmysan
5327 Registered Users
Newest Posts
For your Halloween enjoyment
by Doug_Ritter
1 second ago
Things I have learned recently
by Bingley
Today at 01:54 PM
Who do you follow online? (youtube, etc.)
by quick_joey_small
Today at 10:35 AM
A Bit Old, But Still A VERY Good Read
by Ren
Yesterday at 02:55 PM
Any shortages where you are?
by dougwalkabout
10/29/20 03:47 AM
Another missing hiker in a National Park
by roberttheiii
10/28/20 08:26 PM
What did you do today to prepare?
by haertig
10/27/20 08:30 PM
Doug's pocket survival pak availability
by Ren
10/27/20 12:32 AM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.