Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Page 1 of 2 1 2 >
Topic Options
#14916 - 04/10/03 01:13 AM Fresnel Lens question
Anonymous
Unregistered


Can I cut a sheet of fresnel, say 8x10, to smaller sizes and still get the magnifying capabilities in each piece? I'm thinking of getting some sheets of this and cutting them to psk size. They are sold as magnification sheet for a projector. They magnify 3x and a groove pitch of .3mm with a focal length of 30cm.
Regards
Tom

Top
#14917 - 04/10/03 12:50 PM Re: Fresnel Lens question
Anonymous
Unregistered


Based on doing something similar to that when I was young and stupid, I would say no. Those projector sheets you are talking about are designed and manufactured to function as a single unit. Based on memory, what I ended up with when I did that was a bunch of pieces of plastic that gave a neat prism/rainbow effect when held up to the sunlight, but neither magnified or concentrated the sun's rays.

Top
#14918 - 04/10/03 12:52 PM Re: Fresnel Lens question
Anonymous
Unregistered


Thanks, That's what I suspected.
Oh well Rainbows are nice tho <img src="images/graemlins/smile.gif" alt="" />
Tom

Top
#14919 - 04/10/03 01:32 PM Re: Fresnel Lens question
Virginian Offline
journeyman

Registered: 01/07/03
Posts: 68
Loc: Virginia, USA
Tom,

Maggot hit the nail on the head. Fresnel lenses have circles etched in them that get smaller and smaller as they go toward the center of the lens. This concentrates the light in the direct center of the lens. You can cut an 8" X 10" lens down to 2" X 3" (not the cheapest method), as long as you get the center portion. I have to cut down the Fresnel lens in my smallest kit to make it fit, but since I maintain the center, it still works great.

Semper Fi, George

Top
#14920 - 04/10/03 02:57 PM Re: Fresnel Lens question
Anonymous
Unregistered


This is a little surprising to me...

When I first joined this forum, I didn't know where I could get a 2x3 Fresnel. So I did exactly what is being suggested here, I bought the bigger sheet from a vendor on eBay and then cut them to size.

I didn't seem to have a problem. The cards cut from the corners are off-axis in their focus (you have to hold them at about a 10 degree angle to your target), but they certainly seem to work.

I can't imagine my cutting technique was a lot different that the rest of you (I used scissors). I even radiused the corners so they wouldn't be sharp. I've got one in my wallet right now.

Top
#14921 - 04/10/03 05:17 PM Re: Fresnel Lens question
Anonymous
Unregistered


Tom,

If you live anywhere near a Walmart you can get a small (credit-card size) lens for $1. If you need to trim this one and screw up it is only a dollar. I bought several last fall. The local Wally-world here has them next to the office supply stuff.

Craig

Top
#14922 - 04/11/03 10:25 AM Re: Fresnel Lens question
Anonymous
Unregistered


interesting stuff about the frensel lens, i was going to say that as long as you got the centre part you'd be ok, but someone else got there first! i seem to recall that they were devoloped for lighting to make the intensity of the light even across the whole face of the light, important for photography and film making i suppose. hmm suppose i ought to get back to the lab and stop arsing about on the internet!
sc

Top
#14923 - 04/11/03 01:41 PM Re: Fresnel Lens question
paramedicpete Offline
Pooh-Bah

Registered: 04/09/02
Posts: 1920
Loc: Frederick, Maryland
I belive Fresnel lens have been used in lighthouses thoughout the 19th and early 20th cen. as well. Pete

Top
#14924 - 04/11/03 02:12 PM Re: Fresnel Lens question
Anonymous
Unregistered


Quite right, I'm thinking I even saw one in St. Augustine, Fl. I think the advantage of the Fresnel was a production/maintenance advantage.

A classic lens would have been a very thick piece of glass at the center. Since glass is a fluid, just one with a high viscousity, it would have quickly deformed around the edges under its own weight. A flatter lens solved that problem. The glass fluidity problem is why all big optical telescopes are reflectors... you can support a mirror lens with a strong backing material.

Optically, I don't know that a Fresnel is any different than a classic lens. I'd have to get out my physics book an re-read it to be sure, but you can break a classic lens and the big pieces will still bring light to a focus (even though it may be off center if its a piece from the edge). And if it can bring light to a focus, it can also form images (magnify).

Top
#14925 - 04/11/03 08:18 PM Re: Fresnel Lens question
frenchy Offline
Veteran

Registered: 12/18/02
Posts: 1320
Loc: France
For more info : see this web page. <img src="images/graemlins/laugh.gif" alt="" />

Regards.

Alain
_________________________
Alain

Top
Page 1 of 2 1 2 >



Moderator:  Alan_Romania, Blast, cliff, Hikin_Jim 
March
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Who's Online
0 registered (), 117 Guests and 12 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
GallenR, Jeebo, NicholasMarshall, Yadav, BenFoakes
5367 Registered Users
Newest Posts
What did you do today to prepare?
by dougwalkabout
Yesterday at 11:21 PM
Zippo Butane Inserts
by dougwalkabout
Yesterday at 11:11 PM
Question about a "Backyard Mutitool"
by Ren
03/17/24 01:00 AM
Problem in my WhatsApp configuration
by Chisel
03/09/24 01:55 PM
New Madrid Seismic Zone
by Jeanette_Isabelle
03/04/24 02:44 PM
EDC Reduction
by EchoingLaugh
03/02/24 04:12 PM
Using a Compass Without a Map
by KenK
02/28/24 12:22 AM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit
Glossary
Test

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.