Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Page 1 of 2 1 2 >
Topic Options
#212520 - 12/06/10 11:12 PM I need some electronics advise.
Blast Offline
INTERCEPTOR
Carpal Tunnel

Registered: 07/15/02
Posts: 3760
Loc: TX
Is there a multimeter (volts, ohms, amps) for under $250 that can easily be hooked to a computer and output it's measurements to Excel or even a text file? I need something like that for a world domination work project.

-Blast
_________________________
Foraging Texas
Medicine Man Plant Co.
DrMerriwether on YouTube
Radio Call Sign: KI5BOG
*As an Amazon Influencer, I may earn a sales commission on Amazon links in my posts.

Top
#212521 - 12/06/10 11:43 PM Re: I need some electronics advise. [Re: Blast]
dougwalkabout Offline
Crazy Canuck
Carpal Tunnel

Registered: 02/03/07
Posts: 3219
Loc: Alberta, Canada
Offhand, I can't point you to a specific product. But my understanding is that you can have a full-featured pc-based-oscilloscope in that price range. As for multimeters, it's important to specify what you are trying to track -- most importantly, if it's sine wave, the frequency range and the sampling frequency that will give you meaningful results. Cheapo units have very specific limitations.

My 2c.

Top
#212522 - 12/06/10 11:43 PM Re: I need some electronics advise. [Re: Blast]
chaosmagnet Online   content
Sheriff
Carpal Tunnel

Registered: 12/03/09
Posts: 3819
Loc: USA
http://www.multimeterwarehouse.com/m9803rf.htm

http://www.multimeterwarehouse.com/MS8226f.htm

http://www.multimeterwarehouse.com/VA18Bf.htm

I've never done business with multimeterwarehouse.com and I have no experience with any of these.

Top
#212523 - 12/06/10 11:44 PM Re: I need some electronics advise. [Re: Blast]
Eric Offline
Enthusiast

Registered: 09/09/06
Posts: 323
Loc: Iowa
A couple of quick questions about your plans for world domination er ah work.

Portable (i.e. battery powered) or will AC powered work?
How long is each data collection run (many meters have annoying auto off feature) ?
What sort of Voltage etc. ranges / accuracy are you looking for?
Does this thing need to be calibrated for your plans for world domination?
Does the interface matter to you (RS 232 vs USB)?


I used to play with things like this and you can get something just barely usable (i.e. near junk but kind of works) for pretty cheap. $'s increase as reliability, accuracy and ease of use improve. Generally I would try to con the pointy haired bosses into at least a Fluke multi-meter but that would exceed your budget.

pseudo mandatory disclaimer - nothing to do with Fluke, just like their toys.

- Eric


Edited by Eric (12/06/10 11:50 PM)
Edit Reason: disclaimer
_________________________
You are never beaten until you admit it. - - General George S. Patton


Top
#212524 - 12/06/10 11:45 PM Re: I need some electronics advise. [Re: Blast]
Am_Fear_Liath_Mor Offline
Carpal Tunnel

Registered: 08/03/07
Posts: 3078


USB or RS232c port?

Here's one for $50 if you want to use RS232C

http://www.multimeterwarehouse.com/MAS343f.htm

The Interface software can be downloaded here;

http://www.nostek.co.kr/software/mas343_345_m9803r.zip

I have downloaded and run the setup.exe and it has an Excel button on the GUI to export the data as an export CSV file.

You could always get a USB to RS232c adapter if your PC doesn't have RS232c port.

or a USB model for $250

http://www.multimeterwarehouse.com/VA38f.htm

Fluke will have USB bench multimeters with USB connectivity but will be more expensive.

Top
#212535 - 12/07/10 01:12 AM Re: I need some electronics advise. [Re: Blast]
Blast Offline
INTERCEPTOR
Carpal Tunnel

Registered: 07/15/02
Posts: 3760
Loc: TX
Thanks everyone! The current (ha ha ha, I crack myself up!) use would be recording the change in resistance a piece of conductive foam as it undergoes compression. This is a very cheap pressure sensor based on the resistance of the foams dropping as it is compressed. This is coupled with a cheese press to make my own crush-test instrument. High sensitivity/accuracy would be good. These tests would be under five minutes.

If the multimeter works well with the computer I foresee using it as the basis for all sorts of jury-rigged sensors. Towards that end a USB connection would be nice and easy. The ability to hook a thermocouple to the multimeter would make is useful for a bunch of different tests. In the past I've used LabView software and sensors, but my current boss hates them for some reason. Add to that my budget is almost non-existent and I'm left with building equipment out of scraps and garage-sale finds. But in the end I SHALL RULE THE WOR... er, hopefully get a promotion at work. laugh

-Blast


Edited by Blast (12/07/10 01:14 AM)
_________________________
Foraging Texas
Medicine Man Plant Co.
DrMerriwether on YouTube
Radio Call Sign: KI5BOG
*As an Amazon Influencer, I may earn a sales commission on Amazon links in my posts.

Top
#212546 - 12/07/10 02:16 AM Re: I need some electronics advise. [Re: Blast]
Richlacal Offline
Old Hand

Registered: 02/11/10
Posts: 778
Loc: Los Angeles, CA
How about a Cheap,Digital Postal Scale,You'd be able to Accurately Measure the psi or gsm,thus the Resistance!

Top
#212553 - 12/07/10 03:01 AM Re: I need some electronics advise. [Re: Blast]
Andy Offline
Enthusiast

Registered: 09/13/07
Posts: 378
Loc: SE PA
Originally Posted By: Blast
Thanks everyone! ... But in the end I SHALL RULE THE WOR... er, hopefully get a promotion at work. laugh

-Blast


Why do I get flashbacks to episodes of Pinky and the Brain whenever Blast subtly introduces us to his real agenda?

Pinky's last question of the day "Brain, what are going to do tomorrow?"

Brain always gave this reply, "The same thing we do every day, we're going to try to take over the world!"

So, Blast, what's your next evil plan?

Top
#212555 - 12/07/10 03:08 AM Re: I need some electronics advise. [Re: Blast]
Eugene Offline
Carpal Tunnel

Registered: 12/26/02
Posts: 2995
Radio shack used to have one, IIRC it was something like $89.
Or find someone with a PIC or Basic stamp setup to hook you up with a $5 microcontroller with an ADC

Top
#212559 - 12/07/10 03:30 AM Re: I need some electronics advise. [Re: Andy]
thseng Offline
Old Hand

Registered: 03/24/06
Posts: 900
Loc: NW NJ
Google "USB Data Acquisition"

These guys look promising:
http://www.dataq.com/data-acquisition-starter-kits/data-acquisition-starter-kits.htm

or

http://www.mccdaq.com/solutions/USB-Data-Acquisition.aspx

We use a bunch of these at work:
http://www.omega.com/ppt/pptsc.asp?ref=OMB-DAQ55&Nav=dasc01

I'd get one that also accepts thermocouple inputs. You'll wonder how you did a lab test without it. Then again, I'm an ice machine engineer.

By the way, you want a "load cell" to measure the press force.
http://www.omega.com/toc_asp/subsectionSC.asp?subsection=F03&book=Pressure

Standard disclaimer.
_________________________
- Tom S.

"Never trust and engineer who doesn't carry a pocketknife."

Top
Page 1 of 2 1 2 >



Moderator:  Alan_Romania, Blast, chaosmagnet, cliff 
March
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Who's Online
1 registered (chaosmagnet), 292 Guests and 26 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
GallenR, Jeebo, NicholasMarshall, Yadav, BenFoakes
5367 Registered Users
Newest Posts
What did you do today to prepare?
by dougwalkabout
Yesterday at 11:21 PM
Zippo Butane Inserts
by dougwalkabout
Yesterday at 11:11 PM
Question about a "Backyard Mutitool"
by Ren
03/17/24 01:00 AM
Problem in my WhatsApp configuration
by Chisel
03/09/24 01:55 PM
New Madrid Seismic Zone
by Jeanette_Isabelle
03/04/24 02:44 PM
EDC Reduction
by EchoingLaugh
03/02/24 04:12 PM
Using a Compass Without a Map
by KenK
02/28/24 12:22 AM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit
Glossary
Test

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.