ok... here's the deal. i own this:



and i want to make a handle on the knife out of paracord. does anyone know the proper way to tie it on? i can't find anything "how-to" instructions for tying a rope handle onto the knife. i'm sure it involves threading it through the hole in the handle, but after that i'm lost. any ideas?

County Comm has great instructions for threading paracord around their stuff.
Umm.... here you go
http://countycomm.com/eodrtool.htm
2nd youtube video

If you want to know how to tie knots and make things like rope handles (and a heck of a lot more) a good book to buy or check out of the library is,

“The Ashley Book Of Knots”

No advice on tying it on but a question that I seem to have a mental block on

I understand cord/extra cord but for some reason to me having it be used as the handle for a knife always strikes me as "wrong" in that you seem to be sacrificing a more effective handle to get some cord that you would most likely be using first thing in a survival situation.

Am I just looking at it the wrong way?

The County Comm video might work, but you will probably need to drill at least one more hole. As an alternative, you might try working toward the blade, opposite from what the video does.

If you do that, then end you tie off may be in the wrong place. If you leave enough cord, then you could tie a turkshead, and give it a rather neat appearance. Something like this: http://www.folsoms.net/knots/turkshead.htm

Instead of the county comm method, you could also simply make a whipping, as one might make a temporary whipping for a rope or line. See: http://korpegard.se/knot/?knot=16&hideComments=&showInt

I put a temporary whipping over most of the handle of my coldsteel kukri, then tied two turkshead at either end. The original handle is there, but most of it is covered in line.

The difficulty I foresee you having is where the handle comes out at the point that should be between your index and middle fingers.

good point... but i can't think of any other way to get a handle on there, without doing something more "permanent." since this is my kayak blade (not survival, per se), chances are, i'm not going to be using the paracord for anything in particular... it will be first and foremost a nice grippy handle when wet.

to everyone else, thanks for the links. this is exactly the info i was looking for, but couldn't seem to figure out the right combination of search terms for google.

[censored].png" alt="" />

I then hit myself in the head with the ring, causing all drawing talent to evaporate into thin air.

this may work:

http://www.m4040.com/Knifemaking/cordwrap.htm

If you just want a grippy handle, you might just dip it in something like this. The stuff I have used (not necessarily this particular brand) gives a nice tacky feel to whatever you dip in it, and you can get nice bright colors if you want...

bees wax rubbed on a wood handle will make it grippy