Equipped To Survive Equipped To Survive® Presents
The Survival Forum
Where do you want to go on ETS?

Page 1 of 2 1 2 >
Topic Options
#30871 - 08/28/04 01:13 AM Newbie on sharping knives--help!
fordwillman Offline
Member

Registered: 08/27/04
Posts: 103
Loc: Arizona
Hi everyone,
First, have to say, I really enjoy this forum and Doug's site!! A real find.
I have had several knives in my life and just bought two more, and it is finally time for me to learn how to sharpen them. One has the s30v steel and I am very hesitant to "work" on that one.
What I want is an EASY way or system to "properly" put sharp edges back on my knives when they get dull. Is there such a thing???

Top
#30872 - 08/28/04 02:49 AM Re: Newbie on sharping knives--help!
Anonymous
Unregistered


The closest thing I've seen to "easy" is the Lansky system, but if you can get the hang of holding the correct bevel on your blade edge, you wont bother with the clamps and guides. My advice is practice on cheaper knives and once you get your confidence built up by developing a few "shaving" edges, you can sharpen "fancy" blades without worrying about ruining them. As with many other things in life, the secret is practice, practice, practice.

Troy

Top
#30873 - 08/28/04 04:19 AM Re: Newbie on sharping knives--help!
David Offline
Enthusiast

Registered: 10/09/02
Posts: 245
Loc: Tennessee (middle)
As already noted, you won't go wrong with a Lansky system. I know several people who have them, and they work. The chief complaint is that they are somewhat tedious to use, and not quick to set up & use.

My preference, and of several others of my friends, is for the Spyderco 204 Sharpmaker. It's a variant of the V-style ceramic stick sharpeners. If you can watch the included video, set the base on a level surface, and hold the blade perpendicular to the base, you can do a decent job sharpening a knife. The #204 is a very versatile tool, capable of sharpening both plain & serrated edges, scissors, etc.

I've used mine for the past 14 years, and am very satisfied with it. The current versions have a different base, which is more versatile than my older one. It is also self-contained, doubling as a carrying/storage case.

The Edge-Pro system is also highly regarded, but I have no direct knowledge of it. I believe it is a jig-based system, similar to the Lansky.

All will work (as will simply learning to sharpen a knife the old-fashioned way), but I thing the Spyderco is both easiest, & best.

Good luck.

David

Top
#30874 - 08/29/04 12:17 AM Re: Newbie on sharping knives--help!
norad45 Offline
Veteran

Registered: 07/01/04
Posts: 1506
I agree 100% with Troy. The best way to learn to sharpen is not to buy an expensive sharpening system--buy a couple of $10.00 Mora knives from Ragnar and an elcheapo doublegrit stone from the local hardware store. ( Or grab a cheap kitchen knife and go to town!) Practice on these and then you'll not only have some excellent knives but also the knowledge to sharpen on the nearest flat rock out in the boonies.

(Troy, if I misunderstood or misquoted you go ahead and let me have it!)

(I thought I knew how to sharpen until I was told about "the wire edge.")

I just bought (sight unseen) a Buck PBS crosslock Alaskan Guide Series folder in S30V from Cabelas. So I'll be asking the same question pretty soon! Anybody have experience with this steel?
Regards, Vince

Top
#30875 - 08/29/04 01:01 AM Re: Newbie on sharping knives--help!
Wellspring Offline
journeyman

Registered: 10/08/03
Posts: 54
I bought some Moras, and they're outstanding. I'm learning to freehand sharpen with one, and the other I'll use a Lansky until I'm ready.

Really, if you're a newbie like me who is looking for a fixed blade, get a Mora. Then replace it later with something a little more luxurious once you have some experience and a better sense of your needs and preferences.

Top
#30876 - 08/29/04 03:35 AM Re: Newbie on sharping knives--help!
Anonymous
Unregistered


I assume that by "wire edge" you're referring to what I've always heard called a feather edge. Build it up, fold it over, scrape it off, and you have a "beyond razor" edge... is that correct, and if not, educate me about a wire edge, I'm always looking to learn something new <img src="/images/graemlins/grin.gif" alt="" />.

Top
#30877 - 08/29/04 04:07 AM Re: Newbie on sharping knives--help!
leemann Offline
Soylent Green
Addict

Registered: 02/08/04
Posts: 623
Loc: At the soylent green plant.
A good friend who owns a knife shop uses a bench grinder
with a buffing wheel and a stone wheel. The stone gets it sharp the buffing wheel removes the bur and polishes the edge. Razor sharp and don't ask how I know.

Lee


Edited by leemann (08/29/04 04:08 AM)
_________________________
It's the year 2022...People are still the same
They'll do anything to get what they need.
And they need Soylent Green.
http://datacore.sciflicks.com/soylent_green/sounds/soylent_green_people.wav
RIP OBG

Top
#30878 - 08/29/04 01:10 PM Re: Newbie on sharping knives--help!
GoatRider Offline
Old Hand

Registered: 08/28/04
Posts: 835
Loc: Maple Grove, MN
I do something like that with my lathe tools, never thought of doing it with a hand knife. I use a buffing wheel on my dremel and jeweler's rouge to polish the edge on my chisels to a mirror finish. It really makes my turnings smooth. I'll have to try that on my hand knives.
_________________________
- Benton

Top
#30879 - 08/30/04 03:28 PM Re: Newbie on sharping knives--help!
norad45 Offline
Veteran

Registered: 07/01/04
Posts: 1506
The way I was told, sharpen one side at the chosen angle until you can feel a burr with your finger that runs along the entire edge of the side opposite to the one you've been sharpening. Then turn the knife over and repeat 'til you feel the burr on the other side. Then remove the burr by drawing the blade sideways several times at the same angle the full length of the knife.

I used to over sharpen. I found out I was creating a "wire edge": a super sharp edge that unfortunately is so weak that it folds over and breaks off when any stress is applied to it. That's why my super sharp knives would get dull if you even looked at them. That sounds similar to what you are describing and it's something I now try to avoid. I wonder if a wire edge would be good for a filet knife though?

Regards, Vince

Top
#30880 - 08/30/04 10:59 PM Re: Newbie on sharping knives--help!
Anonymous
Unregistered


In a word... perfect!

Top
Page 1 of 2 1 2 >



Moderator:  Alan_Romania, Blast, cliff, Hikin_Jim 
March
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Who's Online
0 registered (), 456 Guests and 71 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
GallenR, Jeebo, NicholasMarshall, Yadav, BenFoakes
5367 Registered Users
Newest Posts
What did you do today to prepare?
by dougwalkabout
03/27/24 11:21 PM
Zippo Butane Inserts
by dougwalkabout
03/27/24 11:11 PM
Question about a "Backyard Mutitool"
by Ren
03/17/24 01:00 AM
Problem in my WhatsApp configuration
by Chisel
03/09/24 01:55 PM
New Madrid Seismic Zone
by Jeanette_Isabelle
03/04/24 02:44 PM
EDC Reduction
by EchoingLaugh
03/02/24 04:12 PM
Newest Images
Tiny knife / wrench
Handmade knives
2"x2" Glass Signal Mirror, Retroreflective Mesh
Trade School Tool Kit
My Pocket Kit
Glossary
Test

WARNING & DISCLAIMER: SELECT AND USE OUTDOORS AND SURVIVAL EQUIPMENT, SUPPLIES AND TECHNIQUES AT YOUR OWN RISK. Information posted on this forum is not reviewed for accuracy and may not be reliable, use at your own risk. Please review the full WARNING & DISCLAIMER about information on this site.